Hi Anthony, I've tried that and IOS allows it, but the counters remain at 0. When I only apply the voip policy to the frame-relay map-class then it works. But when the voip policy is nested in the shape policy it doesn't. Seems to be a nested policy -map issue…
Rgs Luk From: Anthony Alba [mailto:ascanio.al...@gmail.com] Sent: 05 November 2011 04:32 To: Nicolaers Luk Cc: ccie_voice@onlinestudylist.com Subject: Re: [OSL | CCIE_Voice] cRTP in nested CB traffic shaping policy I have encountered this too Are you able ( does iOS allow it) to put the compress rtp config in the parent shaper class? On 4 Nov 2011, at 21:42, Nicolaers Luk <luk.nicola...@quentris-gdfsuez.be<mailto:luk.nicola...@quentris-gdfsuez.be>> wrote: Hi, I'm trying to setup CB traffic shaping with CRTP. This is the config of the policy maps: policy-map VOIP class RTP priority 28 compress header ip rtp class SIG bandwidth 16 policy-map shape class class-default shape average 365600 3656 service-policy VOIP The policy-map shape is activated on the frame-relay map-class: map-class frame-relay toBR2 frame-relay fragment 480 service-policy output shape This is configured on the HQ router and the Branch office router When I make a call I can see that RTP traffic is matched but the rtp compression counters always remain at 0 BRANCH#show policy-map interface serial 0/1/0.200 Serial0/1/0.200: DLCI 200 - Service-policy output: shape Class-map: class-default (match-any) 403 packets, 27349 bytes 5 minute offered rate 4000 bps, drop rate 0 bps Match: any Queueing queue limit 64 packets (queue depth/total drops/no-buffer drops) 0/0/0 (pkts output/bytes output) 403/27349 shape (average) cir 365600, bc 3656, be 3656 target shape rate 365600 lower bound cir 0, adapt to fecn 0 Service-policy : VOIP queue stats for all priority classes: Queueing queue limit 64 packets (queue depth/total drops/no-buffer drops) 0/0/0 (pkts output/bytes output) 252/15834 Class-map: RTP (match-any) 252 packets, 15834 bytes 5 minute offered rate 4000 bps, drop rate 0 bps Match: access-group name RTP 252 packets, 15834 bytes 5 minute rate 4000 bps Priority: 28 kbps, burst bytes 1500, b/w exceed drops: 0 compress: header ip rtp UDP/RTP (compression on, Cisco, RTP) Sent: 0 total, 0 compressed, 0 bytes saved, 0 bytes sent rate 0 bps Anyone that has an idea why the compression counters remain at 0? Thanks Luk _______________________________________________ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com<http://www.ipexpert.com> Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com<http://www.PlatinumPlacement.com>
_______________________________________________ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com