I have tried the Translation in Hunt Pilot, and it works fine for Calling Number (But not for RDNIS).
So I have made the RDNIS Translation on the SRST Router itself. Ofcourse I have enabled the Redirecting Number on PRI interfaces. I have configure the RDNIS translation on SRST Router, as I have Dialplan pattern defined, and the redirecting number is expanded (Full E164 number). Sure I can use the command: "*no call-forward system redirect*" in call-manager-fallback, so that the redirecting number will be the Internal Extension Number and would not have to configure the RDNIS translation. Also the MWI does not work in such case. Am I correct for this post Ashraf ? On Fri, Nov 25, 2011 at 9:40 PM, Ashraf Ayyash <ash.ayy...@gmail.com> wrote: > Can you give the calling number Translation try ? > > let me know how it goes > > Ash > > On Fri, Nov 25, 2011 at 7:07 AM, datucha123 datucha123 > <datucha...@gmail.com> wrote: > > As I know, I can use the RDNIS number translation also in SRST Router, so > > that the correct RDNIS will be passed to CUC. > > > > As for Hunt Pilot, it will translate only the Calling number (NOT RDNIS). > > > > Sometimes there is a requirement not to use the Alternate Extensions in > CUC > > to acomplish some tasks, so we have either to use the RDNIS translation > on > > the SRST Router, or use the VM Mask Box, if the IP Phones are registered. > > > > On Fri, Nov 25, 2011 at 12:38 PM, Ashraf Ayyash <ash.ayy...@gmail.com> > > wrote: > >> > >> If i understood correctly , you have CUCM <>CUC integration and you > >> have SRST Site and you the site went to the SRST and the phone > >> became telephony service phone the VM mask which is configured on the > >> VM profile on the CCM will be no longer effective > >> > >> If this is correct , go ahead and do calling number manipulation on > >> the Hunt Pilot of the VM and this should suffice otherwise you can > >> configure alternative number on the CUC . > >> > >> > >> Ash > >> > >> On Thu, Nov 24, 2011 at 3:29 AM, datucha123 datucha123 > >> <datucha...@gmail.com> wrote: > >> > I have tryed the same with SRST, but that Mask in VM Profile did not > >> > take > >> > effect :( > >> > > >> > Can anybody tell me, when does that Mask is activated? > >> > > >> > For CUCM registered IP Phones it is working file, but for Phones in > SRST > >> > mode, it does not work any more. > >> > > >> > On Thu, Nov 24, 2011 at 2:09 AM, Chris Martin <clm.c...@gmail.com> > >> > wrote: > >> >> > >> >> Since these are registered with CME and not associated phones with > CUCM > >> >> in > >> >> any way, I am not sure the voice mail profile is invoked since that > is > >> >> tied > >> >> to a line. I don't think I have tested CME phones locally registered > >> >> redirecting into CUCM/CUC without SRST involved. One option would > be a > >> >> voice-translation rule that strips the RDNIS to 4 digits, then > >> >> associate > >> >> this to a dial-peer going to voicemail. > >> >> > >> >> Chris > >> >> > >> >> On Wed, Nov 23, 2011 at 3:14 PM, datucha123 datucha123 > >> >> <datucha...@gmail.com> wrote: > >> >>> > >> >>> Yes, sure, it is enabled on the Incoming Gateway. > >> >>> > >> >>> I have also noticed that the Voice Mail Box Mask is working only for > >> >>> the > >> >>> CUCM Registered IP Phones. It transforms the Redirecting and Calling > >> >>> Number > >> >>> as necessary. But when the IP Phone, that is not registered with > CUCM > >> >>> (CUCME > >> >>> IP Phones) is redirecting the call to CUC, that Transformation does > >> >>> not work > >> >>> :( > >> >>> > >> >>> On Thu, Nov 24, 2011 at 1:06 AM, Chris Martin <clm.c...@gmail.com> > >> >>> wrote: > >> >>>> > >> >>>> At a glance your config seems fine and it should work as you > intend. > >> >>>> I > >> >>>> assume you also allowed incoming redirecting number for the CUCM > >> >>>> gateway? > >> >>>> > >> >>>> Chris > >> >>>> > >> >>>> On Wed, Nov 23, 2011 at 11:38 AM, datucha123 datucha123 > >> >>>> <datucha...@gmail.com> wrote: > >> >>>>> > >> >>>>> Hello, > >> >>>>> > >> >>>>> I have configured the Voice Mail Box Mask for XXXX (As I know, > this > >> >>>>> will transform the Redricting Number to last 4 digits). > >> >>>>> > >> >>>>> but somehow it does not work :( > >> >>>>> > >> >>>>> So here what is happening: > >> >>>>> > >> >>>>> I have configure the User and VM Box in CUC for CUCME IP Phone, > (ext > >> >>>>> 3012). I have configure the Call Forward All on CUCME IP Phone to > >> >>>>> CUC VM > >> >>>>> Pilot through the PSTN (0001911444888) > >> >>>>> > >> >>>>> Also configured the Voice Mail Box Mask for VM Porfile to XXXX. > >> >>>>> > >> >>>>> CUCME IP Phone has also the DialPlan pattern assigned, so that the > >> >>>>> Caller ID is 2553012. > >> >>>>> > >> >>>>> CUCME IP Phone is calling CUC through the PRI PSTN. (I enabled the > >> >>>>> Redirecting IE on PR interfaces). > >> >>>>> > >> >>>>> Also I have enabled the "call-forward system redirect" in > >> >>>>> Telephony-service, so that the redirecting number will be expanded > >> >>>>> based on > >> >>>>> the DialPlan pattern. > >> >>>>> > >> >>>>> So now when the some Phone calls this CUCME IP Phones (That has > >> >>>>> CFWDALL > >> >>>>> to CUC PILOT NUMBER Through PSTN) the caller hears the AA Greeting > >> >>>>> instead > >> >>>>> of Voice Mail leaving greeting. > >> >>>>> > >> >>>>> So as I guess the Voice Mail Box Mask transformation is not > working. > >> >>>>> > >> >>>>> Maybe I am missing something? > >> >>>>> > >> >>>>> > >> >>>>> > >> >>>>> > >> >>>>> _______________________________________________ > >> >>>>> For more information regarding industry leading CCIE Lab training, > >> >>>>> please visit www.ipexpert.com > >> >>>>> > >> >>>>> Are you a CCNP or CCIE and looking for a job? Check out > >> >>>>> www.PlatinumPlacement.com <http://www.platinumplacement.com/> > >> >>>> > >> >>> > >> >> > >> > > >> > > >> > _______________________________________________ > >> > For more information regarding industry leading CCIE Lab training, > >> > please > >> > visit www.ipexpert.com > >> > > >> > Are you a CCNP or CCIE and looking for a job? Check out > >> > www.PlatinumPlacement.com <http://www.platinumplacement.com/> > >> > > > > > >
_______________________________________________ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com