Thank you all for reply. Mohd Baqari : All are 7961 Phones. Brajesh kumaR : MRGL has been assign to all phone's device pools ( not on individual phones) Julien Krieger : BR2 Ph-1 placing BR2 Ph-2 on hold *or* BR1 Ph-1 placing BR1 Ph-2 on hold *or* BR1 Phones placing BR2 Phones and vice versa.
Ken Wyan : multicast moh 239.1.1.1 port 16384 route #fast ethernet IP # #Loop0 IP# - fast eth is a Voice sub Interface IP add. I tried adding ip pim dense-mode on voice sub interface but no luck. -SONU- On Mon, Nov 28, 2011 at 4:45 PM, Ken Wyan <kew...@gmail.com> wrote: > Pls check ip pim dense-mode configured for Voice vlan interface as well > > multicast moh 239.1.1.1 port 16384 route #fast ethernet IP # #Loop0 > IP# also add (br1 phones) vlan interface ip > > Thanks > > On Mon, Nov 28, 2011 at 2:11 PM, Julien Krieger > <krieger.jul...@gmail.com>wrote: > >> Hi, >> >> Who is putting who on hold? >> Are you using the same MRGLs for IPPhone that you used for the Gateway? >> >> Julien >> >> >> 2011/11/28 brajesh kumaR <brjku...@gmail.com> >> >>> Can you please check if branch sites phones have MRGL assigned. What >>> is the region setting between BR1 phone and moh server.If it is g729 >>> then transcoder will be invoked to send spoofed moh stream to branch >>> phone using flash moh file. >>> >>> Regards, >>> Brajesh. >>> >>> >>> >>> On Mon, Nov 28, 2011 at 7:06 AM, Pradeep Kumar Sharma >>> <sonu.netwo...@gmail.com> wrote: >>> > Hello Experts, >>> > >>> > I am working on Branch site Multicast MOH example and spoofing the moh >>> from >>> > router flash memory. >>> > My MOH server inter-region setting is G711 for all branch sites. >>> > >>> > When placing a PSTN call on hold from a Branch phone, the Moh spoofing >>> is >>> > working perfectly. >>> > >>> > When placing a internal branch to branch call on hold, moh is not >>> working >>> > and i am getting a dead-air. >>> > >>> > At the same time:- >>> > - There is no debug output on the branch router. (debug ccm-manager >>> > music-on-hold all) >>> > - show perf query class "Cisco MOH Device" on call manager CLI showing >>> > "MOHMulticastResourceActive = 1" >>> > >>> > >>> > - ccm-manager music-on-hold applied on the Branch router. >>> > - multicast moh 239.1.1.1 port 16384 route #fast ethernet IP # #Loop0 >>> IP# >>> > applied on branch router. >>> > - Only 1 MOH server in MRGL with Multicast enabled. (max hop = 1) >>> > - Multicast routing is disabled on HQ and Branch Site for moh spoofing. >>> > >>> > >>> > Any thought ? >>> > -SONU- >>> > _______________________________________________ >>> > For more information regarding industry leading CCIE Lab training, >>> please >>> > visit www.ipexpert.com >>> > >>> > Are you a CCNP or CCIE and looking for a job? Check out >>> > www.PlatinumPlacement.com <http://www.platinumplacement.com/> >>> > >>> _______________________________________________ >>> For more information regarding industry leading CCIE Lab training, >>> please visit www.ipexpert.com >>> >>> Are you a CCNP or CCIE and looking for a job? Check out >>> www.PlatinumPlacement.com <http://www.platinumplacement.com/> >>> >> >> >> _______________________________________________ >> For more information regarding industry leading CCIE Lab training, please >> visit www.ipexpert.com >> >> Are you a CCNP or CCIE and looking for a job? Check out >> www.PlatinumPlacement.com <http://www.platinumplacement.com/> >> > >
_______________________________________________ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com