Try the command "no mgcp timer receive-rtcp" (then no mgcp/mgcp) to see if this fixes it.
On Dec 2, 2011, at 4:19 PM, Matthew Saskin wrote: > I'd look a bit further, the "silence" is not causing the call to terminate - > what about calls being muted, etc. What do the q931 debugs show when the > call gets disconnected? > > > On Thu, Dec 1, 2011 at 11:02 PM, ccielabrat <ccielab...@gmail.com> wrote: > I noticed a weird thing while testing MGCP. > > If I call out to my pstn phone and answer the call by pressing the answer > soft key , the call will disconnect after about two minutes. > If I answer the call with the speaker button , it stays up forever. > > I'm guessing the problem is I don't have handsets on any of my phones , so > when I answer with the answer softkey , the phone is off hook and sending > "dead air" packets. > Somehow , mgcp see this as an error condition after two minutes or so and > kills the call. > > If the call is on speaker, I guess it picks up enough noise to keep the call > from being considered inactive. > > Weird. > > > _______________________________________________ > For more information regarding industry leading CCIE Lab training, please > visit www.ipexpert.com > > Are you a CCNP or CCIE and looking for a job? Check out > www.PlatinumPlacement.com > > _______________________________________________ > For more information regarding industry leading CCIE Lab training, please > visit www.ipexpert.com > > Are you a CCNP or CCIE and looking for a job? Check out > www.PlatinumPlacement.com
_______________________________________________ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com