Good .  but how you fixed.? Is it matching below statement.

 

Regards,

Mohammed Al Baqari

 

From: datucha123 datucha123 [mailto:datucha...@gmail.com] 
Sent: Tuesday, December 13, 2011 11:58 AM
To: Mohammed Al Baqari
Cc: ccie_voice@onlinestudylist.com
Subject: Re: [OSL | CCIE_Voice] SRST MoH issue

 

Thank you very much for your answer. 

 

I have solved it already :)

On Tue, Dec 13, 2011 at 1:42 AM, Mohammed Al Baqari
<baqari.voic...@gmail.com> wrote:

Hi,

 

I am not sure whether you have fixed this or not. But in between in case you
are using fixed source feed and MMoH SRST, then the following restriction is
valid.

 

MOH is supplied only to PSTN and VoIP G.711 calls. Local IP phone callers
hear a repeating tone on hold for reassurance that they are still connected.

 

Regards,

Mohammed Al Baqari

 

From: ccie_voice-boun...@onlinestudylist.com
[mailto:ccie_voice-boun...@onlinestudylist.com] On Behalf Of datucha123
datucha123
Sent: Friday, December 02, 2011 10:47 PM
To: ccie_voice@onlinestudylist.com
Subject: [OSL | CCIE_Voice] SRST MoH issue

 

Hi Guys,

In SRST mode Branch 1 , I cannot hear the MOH from Flash ,but I hear beep
sound. There is no MOH playing for internal calls from BR1 phn 1 to BR1 Phn
2.

But when I put the PSTN caller on hold the PSTN phn can hear the MOH. I
tried the debug ephone MOHit says:

 

No MOH entry for DN 1

 

*Dec  2 19:27:37.678: ifs_read flash:MobileConnectOn.ulaw.wav end of file at
15078 read 6832 = 21910
*Dec  2 19:27:37.682: moh tail fill from 46 at 0x66BBACF4 length 1168
*Dec  2 19:27:38.254: ephone_hold_resume ignored for s2s set on dn=1 chan=1
hold=1 callID=1547
*Dec  2 19:27:39.922: No MOH entry for DN 1
*Dec  2 19:27:39.926: ephone_hold_resume ignored for s2s set on dn=1 chan=1
hold=0 callID=1547
*Dec  2 19:27:40.678: ifs_read flash:MobileConnectOn.ulaw.wav end of file at
17214 read 4696 = 21910
*Dec  2 19:27:40.678: moh tail fill from 46 at 0x66BB855C length 3304
*Dec  2 19:27:40.882: MoH route If Vlan11 ETHERNET 177.2.11.1 via ARP
*Dec  2 19:27:40.882: MoH route If Loopback0 46 177.1.254.2 via 177.1.254.2

 

 

 

_______________________________________________
For more information regarding industry leading CCIE Lab training, please visit 
www.ipexpert.com

Are you a CCNP or CCIE and looking for a job? Check out 
www.PlatinumPlacement.com

Reply via email to