Here are my NTP commands on the router Ntp server 10.10.110.1 NTP master 9
I did confirm the default route and static route Rc Sent from my iPhone On Jan 4, 2012, at 1:41 PM, Matthew Saskin <m...@saskin.net> wrote: > Also, make sure that 10.10.110.3 is indeed acting as an NTP server. If it's > a router, "ntp master" and "ntp source" to the interface that has the IP > 10.10.110.3, etc. > > I know that I typically forget to put the static route back to the CUE module > since you can get session/console access with the service-module ip/default > gateway set, but no external traffic without the static route. > > -matthew > > On Wed, Jan 4, 2012 at 3:14 PM, datucha123 datucha123 <datucha...@gmail.com> > wrote: > ping 10.10.110.3 - and see if it pings. > > then take a look at the Integrated Service Engine Interface, to see the > default gateway set. > > On Thu, Jan 5, 2012 at 12:03 AM, Rrcrumm <rrcr...@yahoo.com> wrote: > What commands? > > Sent from my iPhone > > On Jan 4, 2012, at 11:53 AM, datucha123 datucha123 <datucha...@gmail.com> > wrote: > >> Verify that CUE can reach the NTP IP Address. and the CUE module has the >> default gateway set >> >> On Wed, Jan 4, 2012 at 11:27 PM, Randall Crumm <rrcr...@yahoo.com> wrote: >> HI, >> I am working on the new lab #2. >> >> When configuring CUE the question asks for the primary NTP server to be >> 10.10.110.3. The default is lo1, 10.10.115.1 >> >> When I enter that IP address, I get an error : >> >> I could not reach 10.10.110.3 using NTP. >> If 10.10.110.3 really is an NTP server, then >> there may be a firewall blocking NTP packets. >> NTP uses UDP port 123. >> >> >> Any thoughts? >> >> >> Thanks, >> Randall >> >> >> >> _______________________________________________ >> For more information regarding industry leading CCIE Lab training, please >> visit www.ipexpert.com >> >> Are you a CCNP or CCIE and looking for a job? Check out >> www.PlatinumPlacement.com >> > > > _______________________________________________ > For more information regarding industry leading CCIE Lab training, please > visit www.ipexpert.com > > Are you a CCNP or CCIE and looking for a job? Check out > www.PlatinumPlacement.com >
_______________________________________________ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
