Kindly find attached the full config of HQ-3750 and HQ-RTR for your reference. Thanks Ramy
From: ramyoth...@hotmail.com To: ccie_voice@onlinestudylist.com Subject: HQ Phones - DHCP Problem Date: Sun, 26 Feb 2012 19:53:34 +0000 Hi All, In the five-lab ebook, lab 2, there's a requirement that HQ/BR1 phones must receive an IP address from the DHCP server configured on HQ-RTR. BR1 phones didreceive IP address successfully but HQ did not. Can anyone help on this? Thanks in advance. Ramy
SiteA-Switch#sh run Building configuration... Current configuration : 2455 bytes ! ! Last configuration change at 15:26:46 UTC Sun Feb 26 2012 ! NVRAM config last updated at 15:26:47 UTC Sun Feb 26 2012 ! version 12.2 no service pad service timestamps debug uptime service timestamps log uptime service password-encryption ! hostname SiteA-Switch ! boot-start-marker boot-end-marker ! ! no aaa new-model switch 1 provision ws-c3750-24p system mtu routing 1500 ip subnet-zero ip routing ! ! ! ! ! ! ! ! ! ! spanning-tree mode pvst spanning-tree extend system-id ! vlan internal allocation policy ascending ! ! ! ! interface FastEthernet1/0/1 description TRUNK to HQ-RTR switchport trunk encapsulation dot1q switchport trunk native vlan 10 switchport mode trunk speed 100 duplex full queue-set 2 ! interface FastEthernet1/0/2 description HQ PHONE 1- 7960 phone switchport access vlan 10 switchport mode access switchport voice vlan 20 spanning-tree portfast ! interface FastEthernet1/0/3 ! interface FastEthernet1/0/4 description SERVER port- do not change switchport access vlan 30 switchport mode access duplex half spanning-tree portfast ! interface FastEthernet1/0/5 ! interface FastEthernet1/0/6 ! interface FastEthernet1/0/7 ! interface FastEthernet1/0/8 ! interface FastEthernet1/0/9 ! interface FastEthernet1/0/10 ! interface FastEthernet1/0/11 ! interface FastEthernet1/0/12 ! interface FastEthernet1/0/13 ! interface FastEthernet1/0/14 ! interface FastEthernet1/0/15 ! interface FastEthernet1/0/16 ! interface FastEthernet1/0/17 ! interface FastEthernet1/0/18 ! interface FastEthernet1/0/19 ! interface FastEthernet1/0/20 ! interface FastEthernet1/0/21 ! interface FastEthernet1/0/22 ! interface FastEthernet1/0/23 description HQ PHONE 2- 7962 phone shutdown ! interface FastEthernet1/0/24 description *** DO NOT CHANGE - THIS IS YOUR L3 CONNECTION TO YOUR VPN!!! *** switchport access vlan 10 switchport mode access speed 100 duplex full no cdp enable ! interface GigabitEthernet1/0/1 ! interface GigabitEthernet1/0/2 ! interface Vlan1 no ip address ! interface Vlan10 ip address 10.10.100.3 255.255.255.0 ! interface Vlan101 no ip address ! ip classless ip route 0.0.0.0 0.0.0.0 10.10.100.1 ip http server no ip http secure-server ! ! no cdp advertise-v2 ! control-plane ! ! line con 0 exec-timeout 0 0 logging synchronous line vty 0 4 exec-timeout 0 0 privilege level 15 logging synchronous no login line vty 5 15 exec-timeout 0 0 privilege level 15 logging synchronous no login ! end SiteA-Switch#
SiteA-RTR#sh run Building configuration... Current configuration : 2533 bytes ! ! Last configuration change at 15:21:47 EST Sun Feb 26 2012 ! NVRAM config last updated at 15:21:47 EST Sun Feb 26 2012 ! version 12.4 service timestamps debug datetime msec service timestamps log datetime msec service password-encryption ! hostname SiteA-RTR ! boot-start-marker warm-reboot boot-end-marker ! logging buffered 51200 warnings ! no aaa new-model memory-size iomem 20 clock timezone EST -5 clock summer-time EDT recurring no network-clock-participate wic 0 dot11 syslog no ip source-route ! ! ip cef ! ! no ip domain lookup ! multilink bundle-name authenticated ! ! voice-card 0 no dspfarm ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! archive log config hidekeys ! ! ! ! controller T1 0/0/0 framing esf linecode b8zs ! controller T1 0/0/1 framing esf linecode b8zs channel-group 0 timeslots 1-24 description WAN CONNECTION- DO NOT CHANGE ! ! ! ! ! interface Loopback0 ip address 10.10.110.1 255.255.255.255 ! interface FastEthernet0/0 no ip address duplex full speed 100 ! interface FastEthernet0/0.10 encapsulation dot1Q 10 native ip address 10.10.100.1 255.255.255.0 ! interface FastEthernet0/0.20 encapsulation dot1Q 20 ip address 10.10.200.3 255.255.255.0 ip helper-address 10.10.210.10 ! interface FastEthernet0/0.30 encapsulation dot1Q 30 ip address 10.10.210.1 255.255.255.0 ! interface FastEthernet0/0.101 ! interface FastEthernet0/0.102 ! interface FastEthernet0/0.103 ! interface FastEthernet0/1 no ip address shutdown duplex auto speed auto ! interface Serial0/0/1:0 no ip address encapsulation frame-relay frame-relay lmi-type ansi ! interface Serial0/0/1:0.1 point-to-point ip address 10.10.111.1 255.255.255.0 ip ospf mtu-ignore snmp trap link-status frame-relay interface-dlci 201 ! interface Serial0/0/1:0.2 point-to-point ip address 10.10.112.1 255.255.255.0 ip ospf mtu-ignore snmp trap link-status frame-relay interface-dlci 202 ! router ospf 1 router-id 10.10.100.1 log-adjacency-changes network 10.10.0.0 0.0.255.255 area 0 ! ip forward-protocol nd ! ! ip http server no ip http secure-server ! ! ! ! ! ! ! control-plane ! ! ! ! ! ! ! ! ! ! gatekeeper shutdown ! ! line con 0 exec-timeout 0 0 logging synchronous line aux 0 line vty 0 4 exec-timeout 0 0 privilege level 15 logging synchronous no login length 0 transport preferred none transport input telnet line vty 5 15 exec-timeout 0 0 privilege level 15 logging synchronous no login transport preferred none transport input telnet ! scheduler allocate 20000 1000 ntp master 5 ! end SiteA-RTR#
_______________________________________________ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com