CBarge/Privacy-button You will need an ephone-template to do this. Example:
ephone-template 1 privacy off softkeys remote-in-use CBarge NewCall softkeys idel Cfwdall ConfList Join NewCall Redial and on the phone that you want to give the privacy button to you need to program it on the ephone Example: Ephone 1 Privacy-button Ephone-template 1 Type 7960 Button 1:1 2:3 Ephone 2 Ephone-template 1 Type 7960 Button 1:2 2:3 HTH Rick Long -----Original Message----- From: ccie_voice-boun...@onlinestudylist.com [mailto:ccie_voice-boun...@onlinestudylist.om] On Behalf Of ccie_voice-requ...@onlinestudylist.com Sent: Tuesday, February 28, 2012 1:57 AM To: ccie_voice@onlinestudylist.com Subject: CCIE_Voice Digest, Vol 72, Issue 147 Send CCIE_Voice mailing list submissions to ccie_voice@onlinestudylist.com To subscribe or unsubscribe via the World Wide Web, visit http://onlinestudylist.com/mailman/listinfo/ccie_voice or, via email, send a message with subject or body 'help' to ccie_voice-requ...@onlinestudylist.com You can reach the person managing the list at ccie_voice-ow...@onlinestudylist.com When replying, please edit your Subject line so it is more specific than "Re: Contents of CCIE_Voice digest..." Today's Topics: 1. Re: AAR with RSVP (Rynard Coetzee) 2. Re: overlapping dial-plan (Juan Lopez) 3. Re: AAR with RSVP (Rynard Coetzee) ---------------------------------------------------------------------- Message: 1 Date: Tue, 28 Feb 2012 06:53:53 +0000 From: Rynard Coetzee <rynard.coet...@bytes.co.za> To: A A <ccie...@gmail.com> Cc: "ccie_voice@onlinestudylist.com" <ccie_voice@onlinestudylist.com> Subject: Re: [OSL | CCIE_Voice] AAR with RSVP Message-ID: <97D19F256B859A48A6A93E8A9210E52A17AF8FBB@BYTESEXCH2K10N1.bytes.local> Content-Type: text/plain; charset="us-ascii" Hi Yes I have it configured ,I also tried configuring the AAR mask under the line ,but still same issue From: A A [mailto:ccie...@gmail.com] Sent: 28 February 2012 03:41 AM To: Rynard Coetzee Subject: Re: [OSL | CCIE_Voice] AAR with RSVP do you have external mask configured ? On Feb 27, 2012 3:53 AM, "Rynard Coetzee" <rynard.coet...@bytes.co.za<mailto:rynard.coet...@bytes.co.za>> wrote: Hi All I have a issue where my AAR is not working from HQ site to BR2 site ,I have configured the RSVP agent and tested it ,working 100% ,I also have AAR group ,and AAR RP configured and also assigned AAR CSS to phones ,the group is also configured under the line. I have also enabled AAR under service params ,when I disable the RSVP agent to force the call via the PSTN ,I see the "Network Congestion, Rerouting" text on the phone ,but I get a fastbusy ,and also running debugs on the HQ GW ,I don`t see the call hitting the GW. Not sure what I am missing here ,I also tried disabling the RSVP completely and using Location B/Width at 23K ,but same result ? Any ideas ? Regards Rynard _______________________________________________ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com<http://www.ipexpert.com> Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com<http://www.PlatinumPlacement.com> -------------- next part -------------- An HTML attachment was scrubbed... URL: </archives/ccie_voice/attachments/20120228/f6aea8c6/attachment-0001.html> ------------------------------ Message: 2 Date: Tue, 28 Feb 2012 07:51:23 +0100 From: Juan Lopez <lopez.hernandez.j...@gmail.com> To: AJ BG <ciscoie2...@gmail.com> Cc: ccie_voice@onlinestudylist.com Subject: Re: [OSL | CCIE_Voice] overlapping dial-plan Message-ID: <CANpj6cwycc1WFSEvBq0T+o_kyQwz08La=k6h7-twy2fnv+8...@mail.gmail.com> Content-Type: text/plain; charset="windows-1252" hi AJ, there is only an issue if that IOS is also capturing digits in digit-by-digit style - which would be the case if it runs CME or SRST with SCCP phones (for SIP phones you can use sip dial rules to turn off KPML). So only then you must make a distinction between LD and INTL dialpeers, aka/ be more specific in your LD dialpeer. If this IOS router only recieves digits en-bloc (aka it's a TDM GW only running h323 or SIP) then in fact there is no issue. LD calls will only match the 9........ and INTNL calls will match the 900T dialpeer. greets, Juan 2012/2/28 AJ BG <ciscoie2...@gmail.com> > Hello All, > > In the IOS gateway how would you solve an overlapping dial-plan issue > between 8 digit European dialing with access code of 9 ?9??..?and > international pattern ?900T?. Assuming that the LD plan that is given > to you is 9 followed by 8digits. > > The router will send the call as soon as it has enough digits. Is > there really anyway to achieve this, beside configure your LD as 9[1-9]??.. > > Thanks, > > AJ > > > _______________________________________________ > For more information regarding industry leading CCIE Lab training, > please visit www.ipexpert.com > > Are you a CCNP or CCIE and looking for a job? Check out > www.PlatinumPlacement.com <http://www.platinumplacement.com/> > -------------- next part -------------- An HTML attachment was scrubbed... URL: </archives/ccie_voice/attachments/20120228/73f5f11a/attachment-0001.html> ------------------------------ Message: 3 Date: Tue, 28 Feb 2012 06:58:58 +0000 From: Rynard Coetzee <rynard.coet...@bytes.co.za> To: "ccie_voice@onlinestudylist.com" <ccie_voice@onlinestudylist.com> Subject: Re: [OSL | CCIE_Voice] AAR with RSVP Message-ID: <97D19F256B859A48A6A93E8A9210E52A17AF8FCE@BYTESEXCH2K10N1.bytes.local> Content-Type: text/plain; charset="us-ascii" Hi Bakta External number mask on the line is full E.164 number (+442077964001) I have no AAR prefix configured The route pattern I have is \+.442077964001 and this RP is in a separate PT ,strange thing is I don`t see the call getting to the GW when I do Q931 debug ,my RP is pointing to the Local RG. Regards Rynard -----Original Message----- From: ccie_voice-boun...@onlinestudylist.com [mailto:ccie_voice-boun...@onlinestudylist.com] On Behalf Of ccie_voice-requ...@onlinestudylist.com Sent: 28 February 2012 12:14 AM To: ccie_voice@onlinestudylist.com Subject: CCIE_Voice Digest, Vol 72, Issue 145 Send CCIE_Voice mailing list submissions to ccie_voice@onlinestudylist.com To subscribe or unsubscribe via the World Wide Web, visit http://onlinestudylist.com/mailman/listinfo/ccie_voice or, via email, send a message with subject or body 'help' to ccie_voice-requ...@onlinestudylist.com You can reach the person managing the list at ccie_voice-ow...@onlinestudylist.com When replying, please edit your Subject line so it is more specific than "Re: Contents of CCIE_Voice digest..." Today's Topics: 1. Re: AAR with RSVP (Baktha Muralidharan) 2. Re: VXML on MGCP Gateway (Ricardo) ---------------------------------------------------------------------- Message: 1 Date: Mon, 27 Feb 2012 13:12:17 -0500 From: Baktha Muralidharan <muralic...@gmail.com> To: ccie_voice@onlinestudylist.com Subject: Re: [OSL | CCIE_Voice] AAR with RSVP Message-ID: <ca+ne39uue3a-fodeaxa0_qwcb6kogwzstmpxxc1hmzfvb10...@mail.gmail.com> Content-Type: text/plain; charset="iso-8859-1" Hi Rynard could you describe the following- - External number mask on the line - AAR prefix - route pattern you have to route the AAR call thanks, /Baktha > > Today's Topics: > > 1. AAR with RSVP (Rynard Coetzee) > > > ---------------------------------------------------------------------- > > Message: 1 > Date: Mon, 27 Feb 2012 11:40:53 +0000 > From: Rynard Coetzee <rynard.coet...@bytes.co.za> > To: "ccie_voice@onlinestudylist.com" <ccie_voice@onlinestudylist.com> > Subject: [OSL | CCIE_Voice] AAR with RSVP > Message-ID: > > > <97D19F256B859A48A6A93E8A9210E52A17AF8F5A@BYTESEXCH2K10N1.bytes.local> > Content-Type: text/plain; charset="us-ascii" > > Hi All > I have a issue where my AAR is not working from HQ site to BR2 site ,I > have configured the RSVP agent and tested it ,working 100% ,I also > have AAR group ,and AAR RP configured and also assigned AAR CSS to > phones ,the group is also configured under the line. I have also > enabled AAR under service params ,when I disable the RSVP agent to > force the call via the PSTN ,I see the "Network Congestion, Rerouting" > text on the phone ,but I get a fastbusy ,and also running debugs on the HQ GW > ,I don`t see the call hitting the GW. > Not sure what I am missing here ,I also tried disabling the RSVP > completely and using Location B/Width at 23K ,but same result ? > Any ideas ? > Regards > Rynard > > -------------- next part -------------- An HTML attachment was > scrubbed... > URL: > </archives/ccie_voice/attachments/20120227/6070bb52/attachment-0001.ht > ml> > > ------------------------------ > > _______________________________________________ > CCIE_Voice mailing list > CCIE_Voice@onlinestudylist.com > http://onlinestudylist.com/mailman/listinfo/ccie_voice > > > End of CCIE_Voice Digest, Vol 72, Issue 144 > ******************************************* > -------------- next part -------------- An HTML attachment was scrubbed... URL: </archives/ccie_voice/attachments/20120227/034cc8c0/attachment-0001.html> ------------------------------ Message: 2 Date: Mon, 27 Feb 2012 17:14:19 -0500 From: Ricardo <ricardoareval...@gmail.com> To: anuj thapa <mynd.sn...@yahoo.in> Cc: "ccie_voice@onlinestudylist.com" <ccie_voice@onlinestudylist.com> Subject: Re: [OSL | CCIE_Voice] VXML on MGCP Gateway Message-ID: <cajzgwy2w53ectc+v7ai7wvvxxnh9oizqxf43qkfv4grqyyx...@mail.gmail.com> Content-Type: text/plain; charset="iso-8859-1" Thanks Brother... I had already seen those docs but honestly it's all greek to me, i know tcl but ( v ) xml is another story. As soon as I finish another project, I will start working more with VXML, if I find the answer I will post it Regards //r.a. On Thu, Feb 23, 2012 at 7:24 PM, anuj thapa <mynd.sn...@yahoo.in> wrote: > > I have no experience in doing this but once upon a time I was also > looking for this and I had an old bookmark that could be helpful ( you > might have already come across it.) > > > http://www.cisco.com/en/US/docs/ios/voice/ivr/configuration/guide/ivra > ppb.html#wpxref17121 > http://www.cisco.com/en/US/docs/ios/voice/vxml/developer/guide/refgde3 > .html > > Ps. Your skills need to be TCL aware > > ------------------------------ > *From:* "ccie_voice-requ...@onlinestudylist.com" < > ccie_voice-requ...@onlinestudylist.com> > *To:* ccie_voice@onlinestudylist.com > *Sent:* Wednesday, 22 February 2012 10:47 PM > *Subject:* CCIE_Voice Digest, Vol 72, Issue 127 > > Send CCIE_Voice mailing list submissions to > ccie_voice@onlinestudylist.com > > To subscribe or unsubscribe via the World Wide Web, visit > http://onlinestudylist.com/mailman/listinfo/ccie_voice > or, via email, send a message with subject or body 'help' to > ccie_voice-requ...@onlinestudylist.com > > You can reach the person managing the list at > ccie_voice-ow...@onlinestudylist.com > > When replying, please edit your Subject line so it is more specific > than "Re: Contents of CCIE_Voice digest..." > > > Today's Topics: > > 1. Re: VXML on MGCP Gateways (Ricardo) > 2. Re: srst softkeys (Jonathan Charles) > 3. Re: LAN QoS, cBarge in CME SRST (Baktha Muralidharan) > 4. Re: cBarge in CME SRST (Rynard Coetzee) > 5. When does IPMA route point show as registered? (Anthony Alba) > > > ---------------------------------------------------------------------- > > Message: 1 > Date: Wed, 22 Feb 2012 12:00:04 -0500 > From: Ricardo <ricardoareval...@gmail.com> > To: wormh...@sch.hu > Cc: ccie_voice@onlinestudylist.com > Subject: Re: [OSL | CCIE_Voice] VXML on MGCP Gateways > Message-ID: > > <CAJzGwY2yh4xZ+oA-gV__6GZWA=138x5BYmYGc40CYs7KBSwO=g...@mail.gmail.com> > Content-Type: text/plain; charset="iso-8859-1" > > Yes Peter, I have done all those options and they all work. > > I just want to know how to configure VXML on MGCP, I have seen several > comments that it can be done, but nobody seems to know how to do it, > and there is no clear documentation about it in Cisco web page > > I think this could come in handy, and a good trick up our sleeves. > > Regards > > //r.a. > > 2012/2/22 "Farkas P?ter" <wormh...@sch.bme.hu> > > > I am not familiar with VXML but you may do it as configuring the > > gateway being also as a H323 gw and send the call back to it from > > CUCM. You set > up > > a dial-peer for incoming h323 call and enable bacd on it. > > > > Also if you have CU or CUC than it can do it for you. > > > > Peter > > ----- Original Message ----- > > From: Ricardo <ricardoareval...@gmail.com> > > Date: Wednesday, February 22, 2012 3:51 pm > > Subject: [OSL | CCIE_Voice] VXML on MGCP Gateways > > To: ccie_voice@onlinestudylist.com > > > > > > > Hi Guys, > > > > > > I am doing a lab thinking out of the box... what if we want to > > > set a > > b-acd > > > tcl-like but for a gateway running MGCP, so a message is played > > > before sending to receptionist or . I know TCL doesn't work with > > > MGCP, but > VXML > > > does... do you have any idea how to set it up? > > > > > > best regards > > > > > > //r.a. > > > _______________________________________________ > > > For more information regarding industry leading CCIE Lab > > > training, > > please visit www.ipexpert.com > > > > > > Are you a CCNP or CCIE and looking for a job? Check out > > www.PlatinumPlacement.com > > > -------------- next part -------------- An HTML attachment was > scrubbed... > URL: > </archives/ccie_voice/attachments/20120222/c24037af/attachment-0001.ht > ml> > > ------------------------------ > > Message: 2 > Date: Wed, 22 Feb 2012 11:07:05 -0600 > From: Jonathan Charles <jonv...@gmail.com> > To: Ken Wyan <kew...@gmail.com> > Cc: ccie_voice@onlinestudylist.com > Subject: Re: [OSL | CCIE_Voice] srst softkeys > Message-ID: > > <caplpvzifwmgo+-ujb2-azldzs35rwekm8w4_u1_vqe3mlhu...@mail.gmail.com> > Content-Type: text/plain; charset="iso-8859-1" > > Has a recent call been made? > > Redial will be dimmed if there are no calls to redial... > > > Jonathan > > On Wed, Feb 22, 2012 at 10:16 AM, Ken Wyan <kew...@gmail.com> wrote: > > > I configured srst ( using telephony-service) . > > > > When phones are in fallback mode Redial softkey is dimmed on 7965 phones. > > > > As per cisco docs , only unsupported softkeys are dimmed in srst mode. > > > > Is this normal or can be any mistake? > > > > Ken > > > > _______________________________________________ > > For more information regarding industry leading CCIE Lab training, > > please visit www.ipexpert.com > > > > Are you a CCNP or CCIE and looking for a job? Check out > > www.PlatinumPlacement.com > > > -------------- next part -------------- An HTML attachment was > scrubbed... > URL: > </archives/ccie_voice/attachments/20120222/16c7858c/attachment-0001.ht > ml> > > ------------------------------ > > Message: 3 > Date: Wed, 22 Feb 2012 12:29:23 -0500 > From: Baktha Muralidharan <muralic...@gmail.com> > To: ccie_voice@onlinestudylist.com > Subject: Re: [OSL | CCIE_Voice] LAN QoS, cBarge in CME SRST > Message-ID: > > <ca+ne39wyazxle+mxgqyv72zwxsokvdn36uy6usze-krmf8t...@mail.gmail.com> > Content-Type: text/plain; charset="iso-8859-1" > > If nothing specific is required for traffic from/to the phones, I > would not do anything there. > Run the auto qos on an unused port. > > Thanks, > /Baktha > > > > -------------------------------------------------------------------- > > -- > > > > Message: 1 > > Date: Wed, 22 Feb 2012 02:13:29 -0800 (PST) > > From: Vega Wong <vega2...@yahoo.com.au> > > To: ccie_voice@onlinestudylist.com > > Subject: [OSL | CCIE_Voice] LAN QoS > > Message-ID: > > > > <1329905609.25199.yahoomailclas...@web65905.mail.ac4.yahoo.com> > > Content-Type: text/plain; charset="utf-8" > > > > Hi all > > > > Just want to get some advise regarding LAN QoS. > > > > Let say if the question ask to apply priority queue and specify > > certain drop % based on a COS value to the interface that connect to the > > router. > > What would you do with the interface that connecting to the phone? > > > > The reason I asked is because if auto-qos is used on the phone > > ports, a few config line will be generated, such as policy map etc. > > Do you > normally > > leave those in there on the phone ports? > > > > Cheers > > > > Vega > > -------------- next part -------------- An HTML attachment was > > scrubbed... > > URL: > > </archives/ccie_voice/attachments/20120222/4edd7d04/attachment-0001. > > html> > > > > > Pls make sure you have configured the ephone-dns to be octo-line > > thanks, > /Baktha > > ------------------------------ > > > > Message: 2 > > Date: Wed, 22 Feb 2012 12:35:57 +0000 > > From: Rynard Coetzee <rynard.coet...@bytes.co.za> > > To: "ccie_voice@onlinestudylist.com" > > <ccie_voice@onlinestudylist.com> > > Subject: [OSL | CCIE_Voice] cBarge in CME SRST > > Message-ID: > > > > > > <97d19f256b859a48a6a93e8a9210e52a17af8...@bytesexch2k10n1.bytes.loca > > l> > > Content-Type: text/plain; charset="us-ascii" > > > > Hi All > > I have an issue to get the cBarge to work when my H323 GW goes into > > SRST ,the shared line shows up on both phones ,but when I have an > > active call > on > > one phone ,I don`t see the number on the other phone ,and the other > > phone does not go into remote in use state when I press the shared > > line > button. I > > have privacy turned off under the ephones and also under the > > telephony service. Also my CFB is registered to the router when in > > srst mode ,I am able to make a normal ad-hoc conference when in srst mode. > > Any ideas ? > > Regards > > Rynard > > -------------- next part -------------- An HTML attachment was > > scrubbed... > > URL: > > </archives/ccie_voice/attachments/20120222/4065d064/attachment-0001. > > html> > > > > ------------------------------ > > > > Message: 3 > > Date: Wed, 22 Feb 2012 13:58:15 +0100 > > From: "Farkas P?ter" <wormh...@sch.bme.hu> > > To: Rynard Coetzee <rynard.coet...@bytes.co.za> > > Cc: "ccie_voice@onlinestudylist.com" > > <ccie_voice@onlinestudylist.com> > > Subject: Re: [OSL | CCIE_Voice] cBarge in CME SRST > > Message-ID: <770ca7cc57a8.4f44f...@sch.bme.hu> > > Content-Type: text/plain; charset=us-ascii > > > > Have you tried to turn off privacy and enable remote-in-use sofktkey > > through an ephone-template attached to the ephone? Privacy setting > > on ephone has a bug in SRST mode. > > > > Peter > > ----- Original Message ----- > > From: Rynard Coetzee <rynard.coet...@bytes.co.za> > > Date: Wednesday, February 22, 2012 1:51 pm > > Subject: [OSL | CCIE_Voice] cBarge in CME SRST > > To: "ccie_voice@onlinestudylist.com" > > <ccie_voice@onlinestudylist.com> > > > > > > > Hi All > > > I have an issue to get the cBarge to work when my H323 GW goes > > > into > > SRST ,the shared line > > > shows up on both phones ,but when I have an active call on one > > > phone ,I > > don`t see the number on > > > the other phone ,and the other phone does not go into remote in > > > use > > state when I press the > > > shared line button. I have privacy turned off under the ephones > > > and > also > > under the telephony > > > service. Also my CFB is registered to the router when in srst mode > > > ,I > am > > able to make a normal > > > ad-hoc conference when in srst mode. > > > Any ideas ? > > > Regards > > > Rynard > > > _______________________________________________ > > > For more information regarding industry leading CCIE Lab > > > training, > > please visit www.ipexpert.com > > > > > > Are you a CCNP or CCIE and looking for a job? Check out > > www.PlatinumPlacement.com > > > > > > ******************************** > > > -------------- next part -------------- An HTML attachment was > scrubbed... > URL: > </archives/ccie_voice/attachments/20120222/c9bea1f5/attachment-0001.ht > ml> > > ------------------------------ > > Message: 4 > Date: Thu, 23 Feb 2012 06:03:06 +0000 > From: Rynard Coetzee <rynard.coet...@bytes.co.za> > To: "wormh...@sch.hu" <wormh...@sch.hu> > Cc: "ccie_voice@onlinestudylist.com" <ccie_voice@onlinestudylist.com> > Subject: Re: [OSL | CCIE_Voice] cBarge in CME SRST > Message-ID: > > <97D19F256B859A48A6A93E8A9210E52A17AF8C26@BYTESEXCH2K10N1.bytes.local> > Content-Type: text/plain; charset="iso-8859-1" > > Yes I have tried it under the template and under the ephone. > > -----Original Message----- > From: "Farkas P?ter" [mailto:wormh...@sch.bme.hu] > Sent: 22 February 2012 02:58 PM > To: Rynard Coetzee > Cc: ccie_voice@onlinestudylist.com > Subject: Re: [OSL | CCIE_Voice] cBarge in CME SRST > > Have you tried to turn off privacy and enable remote-in-use sofktkey > through an ephone-template attached to the ephone? Privacy setting on > ephone has a bug in SRST mode. > > Peter > ----- Original Message ----- > From: Rynard Coetzee <rynard.coet...@bytes.co.za> > Date: Wednesday, February 22, 2012 1:51 pm > Subject: [OSL | CCIE_Voice] cBarge in CME SRST > To: "ccie_voice@onlinestudylist.com" <ccie_voice@onlinestudylist.com> > > > > Hi All > > I have an issue to get the cBarge to work when my H323 GW goes into > > SRST ,the shared line shows up on both phones ,but when I have an > > active call on one phone ,I don`t see the number on the other phone > > ,and the other phone does not go into remote in use state when I > > press the shared line button. I have privacy turned off under the > > ephones and also under the telephony service. Also my CFB is > > registered to the > router when in srst mode ,I am able to make a normal ad-hoc conference > when in srst mode. > > Any ideas ? > > Regards > > Rynard > > _______________________________________________ > > For more information regarding industry leading CCIE Lab training, > > please visit www.ipexpert.com > > > > Are you a CCNP or CCIE and looking for a job? Check out > > www.PlatinumPlacement.com > > > ------------------------------ > > Message: 5 > Date: Thu, 23 Feb 2012 14:47:31 +0800 > From: Anthony Alba <ascanio.al...@gmail.com> > To: CCIE Study <ccie_voice@onlinestudylist.com> > Subject: [OSL | CCIE_Voice] When does IPMA route point show as > registered? > Message-ID: > > <CADkWibfDrCf-oHNHrvOvz5jX+-mjU=j91chpg1ervjvjym6...@mail.gmail.com> > Content-Type: text/plain; charset="iso-8859-1" > > I would like to build-up a step-by-step IPMA Proxy mode checklist and > verification. > > > If you configure the IPMA route point (with DN a superset of Managers' > DNs like 5XXX), configure the IPMA Service Parameters on both Pub/Sub > and restart he IPMA service, ought the IPMA route point appear as > registered? > (at this stage I have no Managers or Assistants configured) > > In my brief testing this usually doesn't happen (I suspect my VMs), > but I would like to confirm whether the IPMA route point should appear > registered or unregistered without any user configuration (yet). > -------------- next part -------------- An HTML attachment was > scrubbed... > URL: > </archives/ccie_voice/attachments/20120223/ef70f719/attachment.html> > > ------------------------------ > > _______________________________________________ > CCIE_Voice mailing list > CCIE_Voice@onlinestudylist.com > http://onlinestudylist.com/mailman/listinfo/ccie_voice > > > End of CCIE_Voice Digest, Vol 72, Issue 127 > ******************************************* > > > > _______________________________________________ > For more information regarding industry leading CCIE Lab training, > please visit www.ipexpert.com > > Are you a CCNP or CCIE and looking for a job? Check out > www.PlatinumPlacement.com > -------------- next part -------------- An HTML attachment was scrubbed... URL: </archives/ccie_voice/attachments/20120227/5abfe24f/attachment.html> ------------------------------ _______________________________________________ CCIE_Voice mailing list CCIE_Voice@onlinestudylist.com http://onlinestudylist.com/mailman/listinfo/ccie_voice End of CCIE_Voice Digest, Vol 72, Issue 145 ******************************************* ------------------------------ _______________________________________________ CCIE_Voice mailing list CCIE_Voice@onlinestudylist.com http://onlinestudylist.com/mailman/listinfo/ccie_voice End of CCIE_Voice Digest, Vol 72, Issue 147 ******************************************* _______________________________________________ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
