Vik, I restarted the router. Calls through my MGCP gw work now and if I shut down the port completly, the calls goes out the alternate path. Weird.
Thanks guys! On Tue, Mar 6, 2012 at 12:07 AM, Vik Malhi <vma...@ipexpert.com> wrote: > What is your second choice gateway? If it is H323 check using debug voip > dialpeer. > > Why is the call not succeeding through the MGCP gw? You are receiving "no > circuit/channel available" which means you are trying to use an invalid > bearer channel. Try using Top-Down within the MGCP gw and then no mgcp/mgcp > and see if the call succeeds. Then when you have the call going through the > MGCP gw successfully shutdown the voiceport and check the backup path. > > Vik Malhi – CCIE #13890 > Managing Partner - IPexpert, Inc. > > Telephone: +1.810.326.1444 ext 420 > Fax: +1.810.454.0130 > Mailto: vma...@ipexpert.com > > > > > On Mar 5, 2012, at 2:36 AM, J. Peralta wrote: > > I have a questions regarding redundancy withing the a route list. > > I changed the Service parameters to > Stop Routing on Unallocated Number Flag : False > > After receiving the following message from my MGCP gateway, Call > Manager does not attempt the call over the secondary group inside the > route List. Any ideas why? > > Jan 12 10:11:17.834 GMT: ISDN Se0/0/0:23 Q931: RX <- CALL_PROC pd = 8 > callref = 0xBDA2 > Channel ID i = 0xA9838B > Exclusive, Channel 11 > Jan 12 10:11:17.918 GMT: ISDN Se0/0/1:23 Q931: RX <- CALL_PROC pd = 8 > callref = 0x9BB5 > Channel ID i = 0xA98383 > Exclusive, Channel 3 > Jan 12 10:11:18.466 GMT: ISDN Se0/0/1:23 Q931: RX <- DISCONNECT pd = > 8 callref = 0x9BB5 > Cause i = 0x80A2 - No circuit/channel available > Jan 12 10:11:18.494 GMT: ISDN Se0/0/1:23 Q931: TX -> RELEASE pd = 8 > callref = 0x1BB5 > Jan 12 10:11:18.566 GMT: ISDN Se0/0/1:23 Q931: RX <- RELEASE_COMP pd > = 8 callref = 0x9BB5 > > Thanks, > > J > _______________________________________________ > For more information regarding industry leading CCIE Lab training, please > visit www.ipexpert.com > > Are you a CCNP or CCIE and looking for a job? Check out > www.PlatinumPlacement.com > > _______________________________________________ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
