plz ignore my last query,... when i implemented the command frame-relay traffic
shapping on the physical interface, it showed the output
________________________________
From: Krishna <vinayak_...@yahoo.com>
To: "ccie_voice@onlinestudylist.com" <ccie_voice@onlinestudylist.com>
Sent: Sunday, June 10, 2012 6:45 PM
Subject: Re: no output on interface for qos
hi folks,
here is my cbwfq config. After i applied it on the interface dlci it shows
nothing in the show policy-map interface.. why this is happening?? your help is
much appreciated.
BR2-RTR#sh run | s class-map|policy-map|map-class
class-map match-any VOIP-CONTROL
match protocol skinny
match protocol mgcp
match protocol sip
match protocol rsvp
match protocol h323
class-map match-any VOIP-RTP
match protocol rtp audio
policy-map PVOIP-CONTROL-RTP
class VOIP-CONTROL
set dscp cs3
bandwidth 66
class VOIP-RTP
set ip dscp ef
bandwidth 112
class class-default
police rate percent 65
exceed-action set-dscp-transmit 0
fair-queue
map-class frame-relay LINKPMAP-VOIP-RTP
frame-relay cir 729600
frame-relay bc 7296
frame-relay be 0
frame-relay mincir 729600
service-policy output PVOIP-CONTROL-RTP
BR2-RTR#sh policy-map interface
BR2-RTR#
Thank you
Krishna.
_______________________________________________
For more information regarding industry leading CCIE Lab training, please visit
www.ipexpert.com
Are you a CCNP or CCIE and looking for a job? Check out
www.PlatinumPlacement.com
