Try to create the .cnf file once again and then reset all the phones. Rdgs, simah.
On Fri, Jun 29, 2012 at 2:18 PM, Ashutosh Dubey <ashu_tosh_du...@yahoo.co.in > wrote: > Hi Guys, > > Today I synched my CME router with internet based NTP server. Now the CME > router shows the correct time. I also have a downstream switch which > synched up with the CME and shows the correct time as well. I have 5 IP > Phones out of which 4 are 7961 and 1 is 7960. All these IP phones are in > same voice VLAN and are working just fine. Now, the issue is that the 7960 > has synched with the CME and shows the correct time, however, the 7961s > fail to sync up with CME and do not show correct time(please note both > types are in same voice vlan and using same CME router as NTP source). I > have changed the time zone as well on CME to make sure the IP phones know > the correct time zone and do not show UTC time. But the problem still > presists. Have even restarted the phones couple of time but still it did > not make any difference. > > Does anyone know what the issue could be here? > > Thanks for giving your valuable time here and looking into this query. > > Regards, > Ashutosh > > > > _______________________________________________ > For more information regarding industry leading CCIE Lab training, please > visit www.ipexpert.com > > Are you a CCNP or CCIE and looking for a job? Check out > www.PlatinumPlacement.com >
_______________________________________________ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com