Yes, the first three commands I put in on every device are, cdp run, cdp ad and cdp t 5.
2012/7/16 Ronmac <ron...@solcon.nl> > Hi, > > Maybe stupid remark but, > Is cdp enabled. AdverV2!!!!! > V1 os not ok > > Regards ron > > Send from my mobile > > Op 16 jul. 2012 om 12:41 heeft Steffen Bruening <stbruen...@gmail.com> > het volgende geschreven: > > Hi James, > > the ports where the phones should be connected are up and I assume the > won't be up when no phone/device is attached to them. CDP is enabled but it > doesn't show cdp information about the devices which are connected to these > ports. Power Inline Auto is the default power mode and have never seen any > explicit power command on the 3750 or switch-modules in the routers which > could affect the power status of these ports. > > Regards > > Steffen > > 2012/7/13 James Dull <jd...@ipexpert.com> > >> Steffen, >> >> Specifically for BR2-RTR and HQ-3750 the ports may need to have power >> inline auto applied, shut for about 30 seconds to 1 minute and no shut. >> BR1-RTR should never need this because it is using a power daughter card >> which always has power applied to the ports. For the 7962's they are >> located remotely and I do not directly control which pods they are assigned >> to but assume that there are not enough to have on every pod at the same >> time so they can be moved by the voice instructor according to where he >> needs them. There should always be phones on the devices though as the >> 7960s are in house and we do not remove those. I ask that you try what I >> recommended to get the phones to show up, they should immediately show up >> in show cdp neigh once power inline auto has been applied. >> >> >> James Dull - CCNA, Comp TIA A+, Network+, Security+ >> Technical Support/Technical Editor - IPexpert, Inc., Masonic (MIT), Inc. >> >> URL:http://www.IPexpert.com/Tell-Me-More<http://www.ipexpert.com/Tell-Me-More> >> >> Phone: +1.810.326.1444 ext 206 >> Email: jd...@ipexpert.com >> Twitter: www.Twitter.com/IPexpert >> Check out OUR CATALOG: http://www.ipexpert.com/catalog >> <image003.jpg> >> >> On Jul 13, 2012, at 1:47 AM, Steffen Bruening <stbruen...@gmail.com> >> wrote: >> >> Hi all, >> >> during all my last 4 proctorlab sessions I missed phones connected to the >> switch/switch-modules. Often only one phone per site is available, >> sometimes a complete site has none. It is really really annoying to find a >> solution about how to bring enough phones (own physical devices or soft >> clients) to the pod. How are your experiences with that? I am using always >> the sessions at 12:00 AM PST. >> >> Regards >> >> Steffen >> _______________________________________________ >> For more information regarding industry leading CCIE Lab training, please >> visit www.ipexpert.com >> >> Are you a CCNP or CCIE and looking for a job? Check out >> www.PlatinumPlacement.com >> >> >> > _______________________________________________ > For more information regarding industry leading CCIE Lab training, please > visit www.ipexpert.com > > Are you a CCNP or CCIE and looking for a job? Check out > www.PlatinumPlacement.com > >
_______________________________________________ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
