Thank you Vipul. I thought re-routing CSS was used only for the SNR configuration. I will take a look and test again. :)
On Tue, Aug 7, 2012 at 3:29 PM, Vipul Jindal (vipjinda) <vipji...@cisco.com>wrote: > It uses the re routing CSS on the remote destination number. > > If you check the call manager traces, you can easily check it. > > > > From: ccielabrat <ccielab...@gmail.com> > Date: Tuesday, August 7, 2012 2:09 PM > To: "ccie_voice@onlinestudylist.com" <ccie_voice@onlinestudylist.com> > Subject: [OSL | CCIE_Voice] MVA -"Your call can not be completed as > dialed" > > To All, > > I'm hoping the group can help me understand the call flow for an MVA call. > I'm able to call into the MVA pilot number , have my remote destination > number recognized and be prompted for my PIN and to dial . > > But I get the message "Your call can not be completed as dialed" for > anything I try to call. > > I understand that the number configured under the mobile voice access page > is used as an "anchor" , as per Vik's vlecture, but I'm unclear what device > is referenced regarding CSS and what should and should be reachable. > > Can anyone please help get closure on this last piece of the puzzle. > > -Lab Rat > > > _______________________________________________ > For more information regarding industry leading CCIE Lab training, please > visit www.ipexpert.com > > Are you a CCNP or CCIE and looking for a job? Check out > www.PlatinumPlacement.com >
_______________________________________________ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com