OK here is the setup, SiteB is registered as a H323 GW to CUCM (5 Lab workbook-Lab3)
Originally all calls worked, inbound from PSTN and Outbound Then I did SRST-CME and hit the bug OK so tried to do the fix and I can't seem to get it to work. So I am asking for help to figure it out as I had too long a day to keep looking at it, I put a good deal of info below but at the end you will see user busy when in CUCM mode and one phone answering in SRST and one saying busy I have tried to reboot the router and still no luck Any help would be greatly appriciated. dial-peer hunt 2 gateway ! ! ! gatekeeper shutdown ! ! telephony-service sdspfarm units 4 sdspfarm tag 1 SB-conf conference hardware srst mode auto-provision all srst dn line-mode octo max-ephones 5 max-dn 10 preference 9 ip source-address 10.10.201.1 port 2000 time-zone 5 time-format 24 voicemail 2600 max-conferences 8 gain -6 transfer-system full-consult create cnf-files version-stamp 7960 Aug 12 2012 07:01:36 ! ! ephone-template 1 softkeys seized Redial Endcall Cfwdall Meetme ! ! ephone-dn 1 octo-line number 3002 label 3002 description +14083873002 name +14083873002 preference 9 ! ! ephone-dn 2 octo-line number 3001 description +14083873001 name +14083873001 preference 9 ! ! ephone-dn 4 octo-line number 3600 conference meetme preference 9 ! ! ephone 1 device-security-mode none mac-address 0024.142E.7794 ephone-template 1 button 1:1 ! ! ! ephone 2 device-security-mode none mac-address 0017.94CF.21A9 ephone-template 1 button 1:2 dial-peer voice 20001 pots preference 9 destination-pattern 3002$ huntstop progress_ind setup enable 3 port 50/0/1 dial-peer voice 20002 pots preference 9 destination-pattern 3001$ huntstop progress_ind setup enable 3 port 50/0/2 dial-peer voice 20003 pots preference 9 destination-pattern 3600$ huntstop progress_ind setup enable 3 port 50/0/4 Call to 3002 in SRST .Aug 13 03:01:03.505: ISDN Se0/0/0:23 Q931: RX <- SETUP pd = 8 callref = 0x00A4 Bearer Capability i = 0x8090A2 Standard = CCITT Transfer Capability = Speech Transfer Mode = Circuit Transfer Rate = 64 kbit/s Channel ID i = 0xA98381 Exclusive, Channel 1 Progress Ind i = 0x8583 - Origination address is non-ISDN Display i = 'Emergency Services' Calling Party Number i = 0x0080, N/A Plan:Unknown, Type:Unknown Called Party Number i = 0xA1, '4083873002' Plan:ISDN, Type:National .Aug 13 03:01:03.509: ISDN Se0/0/0:23 Q931: Received SETUP callref = 0x80A4 callID = 0x000B switch = primary-ni interface = User SiteB-RTR(config)# .Aug 13 03:01:03.525: ISDN Se0/0/0:23 Q931: TX -> CALL_PROC pd = 8 callref = 0x80A4 Channel ID i = 0xA98381 Exclusive, Channel 1 .Aug 13 03:01:03.533: ISDN Se0/0/0:23 Q931: TX -> DISCONNECT pd = 8 callref = 0x80A4 Cause i = 0x8091 - User busy .Aug 13 03:01:03.545: ISDN Se0/0/0:23 Q931: RX <- RELEASE pd = 8 callref = 0x00A4 .Aug 13 03:01:03.545: ISDN Se0/0/0:23 Q931: TX -> RELEASE_COMP pd = 8 callref = 0x80A4 Call to 3001 in SRST .Aug 13 03:01:54.158: ISDN Se0/0/0:23 Q931: RX <- SETUP pd = 8 callref = 0x00A5 Bearer Capability i = 0x8090A2 Standard = CCITT Transfer Capability = Speech Transfer Mode = Circuit Transfer Rate = 64 kbit/s Channel ID i = 0xA98381 Exclusive, Channel 1 Progress Ind i = 0x8583 - Origination address is non-ISDN Display i = 'Emergency Services' Calling Party Number i = 0x0080, N/A Plan:Unknown, Type:Unknown Called Party Number i = 0xA1, '4083873001' Plan:ISDN, Type:National .Aug 13 03:01:54.158: ISDN Se0/0/0:23 Q931: Received SETUP callref = 0x80A5 callID = 0x000C switch = primary-ni interface = User SiteB-RTR(config)# .Aug 13 03:01:54.186: ISDN Se0/0/0:23 Q931: TX -> CALL_PROC pd = 8 callref = 0x80A5 Channel ID i = 0xA98381 Exclusive, Channel 1 .Aug 13 03:01:54.194: ISDN Se0/0/0:23 Q931: TX -> ALERTING pd = 8 callref = 0x80A5 Progress Ind i = 0x8188 - In-band info or appropriate now available SiteB-RTR(config)# .Aug 13 03:01:57.118: ISDN Se0/0/0:23 Q931: RX <- DISCONNECT pd = 8 callref = 0x00A5 Cause i = 0x8290 - Normal call clearing .Aug 13 03:01:57.122: ISDN Se0/0/0:23 Q931: TX -> RELEASE pd = 8 callref = 0x80A5 .Aug 13 03:01:57.134: ISDN Se0/0/0:23 Q931: RX <- RELEASE_COMP pd = 8 callref = 0x00A5 Call to 3002 Registered in CUCM Aug 13 03:15:05.021: ISDN Se0/0/0:23 Q931: RX <- SETUP pd = 8 callref = 0x00A9 Bearer Capability i = 0x8090A2 Standard = CCITT Transfer Capability = Speech Transfer Mode = Circuit Transfer Rate = 64 kbit/s Channel ID i = 0xA98381 Exclusive, Channel 1 Progress Ind i = 0x8583 - Origination address is non-ISDN Display i = 'Emergency Services' Calling Party Number i = 0x0080, N/A Plan:Unknown, Type:Unknown Called Party Number i = 0xA1, '4083873002' Plan:ISDN, Type:National Aug 13 03:15:05.025: ISDN Se0/0/0:23 Q931: Received SETUP callref = 0x80A9 callID = 0x0010 switch = primary-ni interface = User SiteB-RTR(config-subif)# Aug 13 03:15:05.041: ISDN Se0/0/0:23 Q931: TX -> CALL_PROC pd = 8 callref = 0x80A9 Channel ID i = 0xA98381 Exclusive, Channel 1 Aug 13 03:15:05.049: ISDN Se0/0/0:23 Q931: TX -> DISCONNECT pd = 8 callref = 0x80A9 Cause i = 0x8091 - User busy Aug 13 03:15:05.057: ISDN Se0/0/0:23 Q931: RX <- RELEASE pd = 8 callref = 0x00A9 Aug 13 03:15:05.061: ISDN Se0/0/0:23 Q931: TX -> RELEASE_COMP pd = 8 callref = 0x80A9 Call to 3001 in CUCM SiteB-RTR(config-subif)# .Aug 13 03:05:32.010: %IPPHONE-6-UNREGISTER_NORMAL: ephone-2:SEP001794CF21A9 IP:10.10.201.229 Socket:1 DeviceType:Phone has unregistered normally. SiteB-RTR(config-subif)# Aug 13 03:11:07.820: ISDN Se0/0/0:23 Q931: RX <- SETUP pd = 8 callref = 0x00A6 Bearer Capability i = 0x8090A2 Standard = CCITT Transfer Capability = Speech Transfer Mode = Circuit Transfer Rate = 64 kbit/s Channel ID i = 0xA98381 Exclusive, Channel 1 Progress Ind i = 0x8583 - Origination address is non-ISDN Display i = 'Emergency Services' Calling Party Number i = 0x0080, N/A Plan:Unknown, Type:Unknown Called Party Number i = 0xA1, '4083873001' Plan:ISDN, Type:National Aug 13 03:11:07.820: ISDN Se0/0/0:23 Q931: Received SETUP callref = 0x80A6 callID = 0x000D switch = primary-ni interface = User SiteB-RTR(config-subif)# Aug 13 03:11:07.840: ISDN Se0/0/0:23 Q931: TX -> CALL_PROC pd = 8 callref = 0x80A6 Channel ID i = 0xA98381 Exclusive, Channel 1 Aug 13 03:11:07.848: ISDN Se0/0/0:23 Q931: TX -> DISCONNECT pd = 8 callref = 0x80A6 Cause i = 0x8091 - User busy Aug 13 03:11:07.856: ISDN Se0/0/0:23 Q931: RX <- RELEASE pd = 8 callref = 0x00A6 Aug 13 03:11:07.860: ISDN Se0/0/0:23 Q931: TX -> RELEASE_COMP pd = 8 callref = 0x80A6
_______________________________________________ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com