jason, from router to ccm the dnis is 4 digits whereas ANI is sent completely to cucm whatever the pstn is delivering...
________________________________ From: Jason Aarons (AM) <jason.aar...@dimensiondata.com> To: Krishna <vinayak_...@yahoo.com>; Online Study <ccie_voice@onlinestudylist.com> Sent: Wednesday, August 29, 2012 6:36 AM Subject: RE: [OSL | CCIE_Voice] mva showing very strange behavior - never routing the calls to mobile How many digits are you sending from router to ccm? 4? Or 7? Show run | begin dial-peer ? Debug voice translation rule Debug voip dialpeer From:ccie_voice-boun...@onlinestudylist.com [mailto:ccie_voice-boun...@onlinestudylist.com] On Behalf Of Krishna Sent: Wednesday, August 29, 2012 2:19 AM To: Online Study Subject: Re: [OSL | CCIE_Voice] mva showing very strange behavior - never routing the calls to mobile hi folks... i encountered a very strange behavior with mva configuration... i configured mva for h323 site with number 3000, and in the service parameters i enable mva along with mva number, and as well as partial match and 7 digits... remote destination profile has mobile and mobile connect enabled, and the remote destination number is given as 98397263.... incoming call from pstn has 10 digit ani display i.e. 4088397263 ... 1.) first weird behavior : mva didn't recognizes this number, and prompts for enter the remote destination number 2.) call made from 2001 to 3001 only rings 3001 but no traces that it hits h323 gateway in routing the call to mobile number... i enabled both debug voip dialp and deb isdn q931 Now, i changed the remote destination number to 4088397263..then it recognizes this number and asks for pin... with the above configuration, here are the weird results.. when i call to 3001 from pstn phone, it sends the call directly to voicemail rather ringing the extension 3001,and the call is staying for 5 seconds then terminates itself automatically... i am completely lost when this happened.. and when i made the remote destination number to 98397263 it works fine i.e. the 3001 phone rings ... Did anyone experienced this type of behavior in your practice labs..???? any advice or help on this matter is much appreciated.. note: i placed mobile access partition in a different partition that only css of h323 gateway sees it, and also placed in null partition but no difference .. thank you krishna. itevomcid
_______________________________________________ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com