While calling from PSTN to 6178631002 (primary extension at BR1) and when
not answered, it was supposed to go to the UCx via PSTN (AAR is invoked).
The call fails with "invalid IE".
The debug at BR1 is here.
BR1-RTR(config)#
Feb 4 15:05:34.662: ISDN Se0/0/0:23 Q931: RX <- SETUP pd = 8 callref =
0x0082
Bearer Capability i = 0x8090A2
Standard = CCITT
Transfer Capability = Speech
Transfer Mode = Circuit
Transfer Rate = 64 kbit/s
Channel ID i = 0xA98381
Exclusive, Channel 1
Progress Ind i = 0x8583 - Origination address is non-ISDN
Display i = 'Emergency Services'
Calling Party Number i = 0x0080, '911'
Plan:Unknown, Type:Unknown
Called Party Number i = 0xA1, '6178631002'
Plan:ISDN, Type:National
Feb 4 15:05:34.718: ISDN Se0/0/0:23 Q931: TX -> CALL_PROC pd = 8 callref
= 0x8082
Channel ID i = 0xA98381
Exclusive, Channel 1
BR1-RTR(config)#
Feb 4 15:05:34.718: ISDN Se0/0/0:23 Q931: TX -> ALERTING pd = 8 callref =
0x8082
Progress Ind i = 0x8088 - In-band info or appropriate now available
BR1-RTR(config)#
Feb 4 15:05:55.718: ISDN Se0/0/0:23 Q931: TX -> DISCONNECT pd = 8 callref
= 0x8082
Cause i = 0x82FD - Unknown cause value
Feb 4 15:05:55.730: ISDN Se0/0/0:23 Q931: RX <- RELEASE pd = 8 callref =
0x0082
Cause i = 0x82E4 - Invalid information element contents
Feb 4 15:05:55.770: ISDN Se0/0/0:23 Q931: TX -> RELEASE_COMP pd = 8
callref = 0x8082
BR1 gateway has Redirecting Number IE Delivery - Outbound enabled and HQ
gateway has Redirecting Number IE Delivery - Inbound enabled.
The problem is from Vol 2 lab 4.
What else is missing?
--
Suresh Bhandari
_______________________________________________
For more information regarding industry leading CCIE Lab training, please visit
www.ipexpert.com
Are you a CCNP or CCIE and looking for a job? Check out
www.PlatinumPlacement.com
