The call to the mobile phone from the Mobility feature uses the Redirecting CSS at the RDP of the user. None of the internal phones would have access to use that CSS unless ofcourse it is the same CSS assigned to phones, but that wouldn't be a great way to set up SNR. It's best to have dedicated Class of Control.
What is the behavior you get when you dial (Call Can't be Completed as Dialed or fast busy)? If you are getting the message about incorrectly dialed number I'd start looking at the Route Patterns, Partitions and Calling Search Spaces associated with the phones in CUCM. If it's fast busy you may have a case where you aren't passing the right digits or plan/type to the PSTN. Standard PSTN debugging should work to help out with that (debug voice diapleer and debug issn q931). Hope this helps! Jason On Sun, Mar 3, 2013 at 8:36 PM, Stacy Vacca <stacy.va...@gmail.com> wrote: > I am working on SRN in Lab 5C. I am having issues with Internal Calls > ringing my mobile device. I call from CME Site or PSTN. It > successfully rings line 2 on PSTN Phone. I call from any phone > registered to CUCM and it will not ring my mobile number on the PSTN > Phone. I can answer the call on HQ Phone 2 and push the mobility > button and successfully transfer the call out and then bring it back. > Thoughts? > > Thanks > Stacy > _______________________________________________ > For more information regarding industry leading CCIE Lab training, please > visit www.ipexpert.com > > Are you a CCNP or CCIE and looking for a job? Check out > www.PlatinumPlacement.com >
_______________________________________________ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
