Hi Jamie, Thanks for your reply,Actually the question does not provide much information its just say that Call From HQ to BRABCH-2 so is it safe to use on AAR Group/CSS as well as location on Voice Mail configuration let me try these
Thanks On Tue, Mar 5, 2013 at 12:13 PM, Jamie Parr (jamparr) <jamp...@cisco.com>wrote: > I configure AAR on all of these. Applying AAR to the device pool will > mean only giving all the relevant extensions the AAR group, not much extra > config as you have to visit all those pages anyway. Better safe than sorry > **** > > ** ** > > *Jamie Parr* > Engineer - IT > jamp...@cisco.com > Phone: *+44 20 8824 2641* > Mobile: *+44 7590622049***** > > ** ** > > *From:* ccie_voice-boun...@onlinestudylist.com [mailto: > ccie_voice-boun...@onlinestudylist.com] *On Behalf Of *CISCO CCIE VOICE > *Sent:* 05 March 2013 08:13 > *To:* ccie_voice@onlinestudylist.com > *Subject:* [OSL | CCIE_Voice] AAR HELP**** > > ** ** > > Hi experts, > > Can any one help me to understand the below Question > > Call from HQ to Branch-2 should invoke AAR base on RSVP bandwidth,If > HQPH1 calls BR2PH1 then it should display E.164 number and Network > congestion Re-routing Message on Phone > So ,my doubt is that do i need to use AAR and location on VM Pilot > Number,VM Ports ,CUE-PORTS and CTI-Route Point etc > > > Thanks**** >
_______________________________________________ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com