Hello Ikizoo, Your service name under application is cmm and under dial peer you are invoking ccm so incoming dial peer does not find the service and call fails. Also in the debugs you can see this error..
RELEASE_COMP pd = 8 callref = 0x80A1 Cause i = 0x80BF - Service/option not available, unspecified Thanks and regards, Piyush Jain Sent from my android device. -----Original Message----- From: ccie_voice-requ...@onlinestudylist.com To: ccie_voice@onlinestudylist.com Sent: Thu, 16 May 2013 11:01 AM Subject: CCIE_Voice Digest, Vol 87, Issue 38 Send CCIE_Voice mailing list submissions to ccie_voice@onlinestudylist.com To subscribe or unsubscribe via the World Wide Web, visit http://onlinestudylist.com/mailman/listinfo/ccie_voice or, via email, send a message with subject or body 'help' to ccie_voice-requ...@onlinestudylist.com You can reach the person managing the list at ccie_voice-ow...@onlinestudylist.com When replying, please edit your Subject line so it is more specific than "Re: Contents of CCIE_Voice digest..." Today's Topics: 1. Cucm log (Dharambir kumar varma) 2. Cucm log (Dharambir kumar varma) 3. Re: MVA Fast Busy (ikizoo hello) 4. Re: MVA Fast Busy (Abdullin Kamil) 5. Re: MVA Fast Busy (GRASSMUGG Christoph) ---------------------------------------------------------------------- Message: 1 Date: Thu, 16 May 2013 10:00:55 +0530 From: Dharambir kumar varma <dharambi...@gmail.com> To: "ccie_voice@onlinestudylist.com" <ccie_voice@onlinestudylist.com> Subject: [OSL | CCIE_Voice] Cucm log Message-ID: <ca+iwkjsxty0ddkospu06mw4xqsuknqebbkos0nwguv-xqbx...@mail.gmail.com> Content-Type: text/plain; charset="iso-8859-1" Hi Can we delete the audit logs on cucm which is seen on Rtmt tool. Is it possible ... -------------- next part -------------- An HTML attachment was scrubbed... URL: </archives/ccie_voice/attachments/20130516/34bb040f/attachment-0001.html> ------------------------------ Message: 2 Date: Thu, 16 May 2013 10:05:26 +0530 From: Dharambir kumar varma <dharambi...@gmail.com> To: "ccie_voice@onlinestudylist.com" <ccie_voice@onlinestudylist.com> Subject: [OSL | CCIE_Voice] Cucm log Message-ID: <CA+iWkJSBDGJQQk6E2TXjCXJptj4zWa3_ZgVy2Oc2XJ0vU=_...@mail.gmail.com> Content-Type: text/plain; charset="iso-8859-1" Hi Can we delete audit logs on cucm Which can be seen on Rtmt tool. Is it possible.... -------------- next part -------------- An HTML attachment was scrubbed... URL: </archives/ccie_voice/attachments/20130516/27cdebb2/attachment-0001.html> ------------------------------ Message: 3 Date: Wed, 15 May 2013 21:48:20 -0700 From: ikizoo hello <ikiz...@hotmail.com> To: Josh Petro <josh.pe...@gmail.com>, "ccie_voice@onlinestudylist.com" <ccie_voice@onlinestudylist.com> Subject: Re: [OSL | CCIE_Voice] MVA Fast Busy Message-ID: <bay172-w29a3a6888bf62b11239673ea...@phx.gbl> Content-Type: text/plain; charset="iso-8859-1" application service cmm http://10.10.210.10:8080/ccmivr/pages/IVRMainpage.vxml dial-peer voice 2 pots service ccm ccm ---> cmm ? Date: Wed, 15 May 2013 23:48:40 -0400 From: josh.pe...@gmail.com To: ccie_voice@onlinestudylist.com Subject: [OSL | CCIE_Voice] MVA Fast Busy Hi All, I'm on Volume 1 section 5C which is asking for Mobile Vocie Access configuration. What I'm getting when I dial from the PSTN to the HQ Phone 2 is a fast busy after a few seconds of silence. I know this has been talked about in the past on this forum, but for the life of me I can't find it. I've followed what was in the workbook exactly and I'm not getting anywhere. Now, I'm doing this on my home lab with IOS 12.4.22T5 and nothing else in the flash directory. Is there something that needs to be 'installed' on the router to allow it to see the vxml code on the CUCM? I've never been asked to do Mobile Voice Access before, so this is a first. The CUCM is configured with the Mobile Voice Access number of 5999 and the gateway is configured for 4 digits inbound (plus I tested other inbound calls and they still work fine). The Services parameters are correct and MVA is enabled. The voice-class codec has G711u and G729r8 and that's it. I'm thinking codec, but I'm not sure why. I can't figure out what I missed. Many thanks!Josh The config and debug isdn q931 output is below if it helps. I didn't get the chance to get the voip ccapi debugs, so please let me know if you need them and I'll grab them tomorrow. !application service cmm http://10.10.210.10:8080/ccmivr/pages/IVRMainpage.vxml !! dial-peer voice 5010 voip description MVA DID destination-pattern 5999 voice-class codec 1 session target ipv4:10.10.210.10 incoming called-number . dtmf-relay h245-alphanumeric no vad!dial-peer voice 2 pots service ccm incoming called-number 2123945999 no digit-strip!!!!! !HQ-RTR(config-dial-peer)#May 16 03:12:37.874: ISDN Se0/0/0:23 Q931: RX <- SETUP pd = 8 callref = 0x00A1 Bearer Capability i = 0x8090A2 Standard = CCITT Transfer Capability = Speech Transfer Mode = Circuit Transfer Rate = 64 kbit/s Channel ID i = 0xA98381 Exclusive, Channel 1 Progress Ind i = 0x8583 - Origination address is non-ISDN Calling Party Number i = 0x4180, '2123942123' Plan:ISDN, Type:Subscriber(local) Called Party Number i = 0xA1, '2123945999' Plan:ISDN, Type:NationalMay 16 03:12:37.874: ISDN Se0/0/0:23 Q931: Received SETUP callref = 0x80A1 callID = 0x0020 switch = primary-ni interface = User May 16 03:12:37.882: %CALL_CONTROL-6-APP_NOT_FOUND: Application ccm in dial-peer 2 not found. Handing callid 187 to the alternate app . HQ-RTR(config-dial-peer)#May 16 03:12:37.890: ISDN Se0/0/0:23 Q931: TX -> RELEASE_COMP pd = 8 callref = 0x80A1 Cause i = 0x80BF - Service/option not available, unspecified HQ-RTR(config-dial-peer)# _______________________________________________ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com -------------- next part -------------- An HTML attachment was scrubbed... URL: </archives/ccie_voice/attachments/20130515/f8a5f20e/attachment-0001.html> ------------------------------ Message: 4 Date: Thu, 16 May 2013 10:56:32 +0600 From: Abdullin Kamil <kabdulli...@gmail.com> To: Josh Petro <josh.pe...@gmail.com> Cc: "ccie_voice@onlinestudylist.com" <ccie_voice@onlinestudylist.com> Subject: Re: [OSL | CCIE_Voice] MVA Fast Busy Message-ID: <cagwhbqa-no+t7jjypcdjb0hifnm5cesxif_bu26w8vkopzo...@mail.gmail.com> Content-Type: text/plain; charset="koi8-r" Hi Josh. You have error in name service "ccm" and "cmm". application service *cmm * dial-peer voice 2 pots service *ccm* Change name for service to ccm. 2013/5/16 Josh Petro <josh.pe...@gmail.com> > Hi All, > > I'm on Volume 1 section 5C which is asking for Mobile Vocie Access > configuration. What I'm getting when I dial from the PSTN to the HQ Phone 2 > is a fast busy after a few seconds of silence. > > I know this has been talked about in the past on this forum, but for the > life of me I can't find it. > > I've followed what was in the workbook exactly and I'm not getting > anywhere. Now, I'm doing this on my home lab with IOS 12.4.22T5 and nothing > else in the flash directory. Is there something that needs to be > 'installed' on the router to allow it to see the vxml code on the CUCM? > I've never been asked to do Mobile Voice Access before, so this is a first. > > The CUCM is configured with the Mobile Voice Access number of 5999 and the > gateway is configured for 4 digits inbound (plus I tested other inbound > calls and they still work fine). > > The Services parameters are correct and MVA is enabled. The voice-class > codec has G711u and G729r8 and that's it. I'm thinking codec, but I'm not > sure why. > > I can't figure out what I missed. > > Many thanks! > Josh > > The config and debug isdn q931 output is below if it helps. I didn't get > the chance to get the voip ccapi debugs, so please let me know if you need > them and I'll grab them tomorrow. > > ! > application > service cmm http://10.10.210.10:8080/ccmivr/pages/IVRMainpage.vxml > ! > ! > dial-peer voice 5010 voip > description MVA DID > destination-pattern 5999 > voice-class codec 1 > session target ipv4:10.10.210.10 > incoming called-number . > dtmf-relay h245-alphanumeric > no vad > ! > dial-peer voice 2 pots > service ccm > incoming called-number 2123945999 > no digit-strip > ! > ! > ! > ! > ! > ! > HQ-RTR(config-dial-peer)# > May 16 03:12:37.874: ISDN Se0/0/0:23 Q931: RX <- SETUP pd = 8 callref = > 0x00A1 > Bearer Capability i = 0x8090A2 > Standard = CCITT > Transfer Capability = Speech > Transfer Mode = Circuit > Transfer Rate = 64 kbit/s > Channel ID i = 0xA98381 > Exclusive, Channel 1 > Progress Ind i = 0x8583 - Origination address is non-ISDN > Calling Party Number i = 0x4180, '2123942123' > Plan:ISDN, Type:Subscriber(local) > Called Party Number i = 0xA1, '2123945999' > Plan:ISDN, Type:National > May 16 03:12:37.874: ISDN Se0/0/0:23 Q931: Received SETUP callref = > 0x80A1 callID = 0x0020 switch = primary-ni interface = User > May 16 03:12:37.882: %CALL_CONTROL-6-APP_NOT_FOUND: Application ccm in > dial-peer 2 not found. Handing callid 187 to the alternate app . > > HQ-RTR(config-dial-peer)# > May 16 03:12:37.890: ISDN Se0/0/0:23 Q931: TX -> RELEASE_COMP pd = 8 > callref = 0x80A1 > Cause i = 0x80BF - Service/option not available, unspecified > HQ-RTR(config-dial-peer)# > > > > _______________________________________________ > For more information regarding industry leading CCIE Lab training, please > visit www.ipexpert.com > > Are you a CCNP or CCIE and looking for a job? Check out > www.PlatinumPlacement.com > -- ? ?????????, ?????? ???????? -------------- next part -------------- An HTML attachment was scrubbed... URL: </archives/ccie_voice/attachments/20130516/0def5be2/attachment-0001.html> ------------------------------ Message: 5 Date: Thu, 16 May 2013 07:08:51 +0200 From: GRASSMUGG Christoph <christoph.grassm...@nextiraone.eu> To: Josh Petro <josh.pe...@gmail.com> Cc: "ccie_voice@onlinestudylist.com" <ccie_voice@onlinestudylist.com> Subject: Re: [OSL | CCIE_Voice] MVA Fast Busy Message-ID: <9f46ff16-3557-4c4c-b5e8-ffb8aa66b...@nextiraone.eu> Content-Type: text/plain; charset="utf-8" Hi, Your Problem is... Dial-Peer Service ccm But under Application your Service is caller cmm So no Service can be found... -Christoph Sent from a Smartphone. Am 16.05.2013 um 06:00 schrieb "Josh Petro" <josh.pe...@gmail.com<mailto:josh.pe...@gmail.com>>: Hi All, I'm on Volume 1 section 5C which is asking for Mobile Vocie Access configuration. What I'm getting when I dial from the PSTN to the HQ Phone 2 is a fast busy after a few seconds of silence. I know this has been talked about in the past on this forum, but for the life of me I can't find it. I've followed what was in the workbook exactly and I'm not getting anywhere. Now, I'm doing this on my home lab with IOS 12.4.22T5 and nothing else in the flash directory. Is there something that needs to be 'installed' on the router to allow it to see the vxml code on the CUCM? I've never been asked to do Mobile Voice Access before, so this is a first. The CUCM is configured with the Mobile Voice Access number of 5999 and the gateway is configured for 4 digits inbound (plus I tested other inbound calls and they still work fine). The Services parameters are correct and MVA is enabled. The voice-class codec has G711u and G729r8 and that's it. I'm thinking codec, but I'm not sure why. I can't figure out what I missed. Many thanks! Josh The config and debug isdn q931 output is below if it helps. I didn't get the chance to get the voip ccapi debugs, so please let me know if you need them and I'll grab them tomorrow. ! application service cmm http://10.10.210.10:8080/ccmivr/pages/IVRMainpage.vxml ! ! dial-peer voice 5010 voip description MVA DID destination-pattern 5999 voice-class codec 1 session target ipv4:10.10.210.10 incoming called-number . dtmf-relay h245-alphanumeric no vad ! dial-peer voice 2 pots service ccm incoming called-number 2123945999 no digit-strip ! ! ! ! ! ! HQ-RTR(config-dial-peer)# May 16 03:12:37.874: ISDN Se0/0/0:23 Q931: RX <- SETUP pd = 8 callref = 0x00A1 Bearer Capability i = 0x8090A2 Standard = CCITT Transfer Capability = Speech Transfer Mode = Circuit Transfer Rate = 64 kbit/s Channel ID i = 0xA98381 Exclusive, Channel 1 Progress Ind i = 0x8583 - Origination address is non-ISDN Calling Party Number i = 0x4180, '2123942123' Plan:ISDN, Type:Subscriber(local) Called Party Number i = 0xA1, '2123945999' Plan:ISDN, Type:National May 16 03:12:37.874: ISDN Se0/0/0:23 Q931: Received SETUP callref = 0x80A1 callID = 0x0020 switch = primary-ni interface = User May 16 03:12:37.882: %CALL_CONTROL-6-APP_NOT_FOUND: Application ccm in dial-peer 2 not found. Handing callid 187 to the alternate app . HQ-RTR(config-dial-peer)# May 16 03:12:37.890: ISDN Se0/0/0:23 Q931: TX -> RELEASE_COMP pd = 8 callref = 0x80A1 Cause i = 0x80BF - Service/option not available, unspecified HQ-RTR(config-dial-peer)# _______________________________________________ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com<http://www.ipexpert.com> Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com<http://www.PlatinumPlacement.com> ------------------------------ _______________________________________________ CCIE_Voice mailing list CCIE_Voice@onlinestudylist.com http://onlinestudylist.com/mailman/listinfo/ccie_voice End of CCIE_Voice Digest, Vol 87, Issue 38 ******************************************
_______________________________________________ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com