Hi Amit, Remove the TCL application and add it again i will work
Thanks On Sun, Jun 30, 2013 at 9:00 AM, <ccie_voice-requ...@onlinestudylist.com>wrote: > Send CCIE_Voice mailing list submissions to > ccie_voice@onlinestudylist.com > > To subscribe or unsubscribe via the World Wide Web, visit > http://onlinestudylist.com/mailman/listinfo/ccie_voice > or, via email, send a message with subject or body 'help' to > ccie_voice-requ...@onlinestudylist.com > > You can reach the person managing the list at > ccie_voice-ow...@onlinestudylist.com > > When replying, please edit your Subject line so it is more specific > than "Re: Contents of CCIE_Voice digest..." > > > Today's Topics: > > 1. Re: Translation-rule help (michael.se...@compucom.com) > 2. TCL applied but when calling 4000 call disconnected... > (Amit Sharma) > > > ---------------------------------------------------------------------- > > Message: 1 > Date: Sat, 29 Jun 2013 16:54:54 +0000 > From: <michael.se...@compucom.com> > To: <ccie_voice@onlinestudylist.com> > Subject: Re: [OSL | CCIE_Voice] Translation-rule help > Message-ID: > > <E88AFBC60579234C886F57D49AC243A93702543F@SPW099EXM06.compucom.local> > Content-Type: text/plain; charset="us-ascii" > > Regis, > > If I understand you correctly you're placing an international call and > want to do variable digit dialing, most likely for either SRST or for an > H323 gateway. In this case where your using 9 for the secondary dial tone > and 011 for international calling you wouldn't use a voice translation to > remove the 9. The translations would be used to mark the traffic as > international and send out the calling number as E164. The example below > indicates how I use translations for international dialing on H323 gateway > and SRST. Since 9011 is an explicit match it will automatically be dropped > and you add the 011 back in using the prefix 011 as stated by Regis. > ! > voice translation-rule 4 > rule 1 /^4...$/ /+1888404&/ type any international plan any isdn > ! > voice translation-rule 14 > rule 1 // // type any international plan any isdn > ! > voice translation-profile international > translate calling 4 > translate called 14 > ! > dial-peer voice 9011 pots > translation-profile outgoing international > destination-pattern 9011T > port 0/1/0:23 > prefix 011 > ! > Michael Sears, CCIE(V)#38404 > ! > "Designing and Implementing Cisco Unified Communications on Unified > Computing Systems" > > > > > ------------------------------ > > Message: 2 > Date: Sun, 30 Jun 2013 09:00:18 +0300 > From: Amit Sharma <aryan231...@gmail.com> > To: CCIE Study <ccie_voice@onlinestudylist.com> > Subject: [OSL | CCIE_Voice] TCL applied but when calling 4000 call > disconnected... > Message-ID: > < > caanry+5dkcxoihvpcfbkzssnj5gpgy9jxj67ernveeeazwk...@mail.gmail.com> > Content-Type: text/plain; charset="iso-8859-1" > > guys see my applied config... > when call 4000 is goes disconnected... > > what is issue? > > > > SiteC-RTR#sh run > Building configuration... > > Current configuration : 10065 bytes > ! > ! Last configuration change at 11:17:36 HK Sun Jun 30 2013 > ! NVRAM config last updated at 10:55:49 HK Sun Jun 30 2013 > ! > version 12.4 > service timestamps debug datetime msec > service timestamps log datetime msec > service password-encryption > ! > hostname SiteC-RTR > ! > boot-start-marker > boot system flash:c2800nm-adventerprisek9-mz.124-22.T.bin > warm-reboot > boot-end-marker > ! > logging message-counter syslog > logging buffered 4096 > ! > no aaa new-model > memory-size iomem 20 > clock timezone HK 8 > network-clock-participate wic 0 > no network-clock-participate wic 1 > network-clock-select 1 E1 0/0/0 > ! > dot11 syslog > ip source-route > ! > ! > ip cef > ip dhcp excluded-address 10.10.202.1 10.10.202.10 > ip dhcp excluded-address 10.10.202.15 10.10.202.254 > ! > ip dhcp pool CME > origin file flash:/ciscolab.txt > default-router 10.10.202.1 > option 150 ip 10.10.210.11 10.10.210.10 > ! > ! > no ip domain lookup > no ipv6 cef > ! > multilink bundle-name authenticated > ! > ! > isdn switch-type primary-net5 > ! > ! > ! > voice service voip > allow-connections h323 to h323 > allow-connections h323 to sip > allow-connections sip to h323 > allow-connections sip to sip > ! > ! > ! > ! > ! > ! > ! > ! > ! > ! > ! > ! > ! > ! > ! > voice translation-rule 1 > rule 1 // // type any unknown plan any isdn > ! > voice translation-rule 2 > rule 1 // // type any subscriber plan any isdn > ! > voice translation-rule 3 > rule 1 // // type any national plan any isdn > ! > voice translation-rule 4 > rule 1 // // type any international plan any isdn > ! > voice translation-rule 5 > rule 1 /.*\(4...\)/ /\1/ > ! > voice translation-rule 11 > rule 1 /^3.../ /8522404&/ type any national plan any isdn > ! > voice translation-rule 12 > rule 1 /^3.../ /2404&/ type any subscriber plan any isdn > ! > voice translation-rule 13 > rule 1 /^3.../ /8522404&/ type any national plan any isdn > ! > voice translation-rule 14 > rule 1 /^3.../ /+8522404&/ type any international plan any isdn > ! > voice translation-rule 67 > rule 1 /^\*/ // > ! > ! > voice translation-profile 911 > translate calling 11 > translate called 1 > ! > voice translation-profile did > translate called 5 > ! > voice translation-profile int > translate calling 14 > translate called 4 > ! > voice translation-profile local > translate calling 12 > translate called 2 > ! > voice translation-profile national > translate calling 13 > translate called 3 > ! > voice translation-profile vm-redirect > translate redirect-called 67 > ! > ! > voice-card 0 > dspfarm > dsp services dspfarm > ! > ! > application > service app-b-acd-aa > param voice-mail 4200 > paramspace english index 0 > param max-time-call-retry 700 > param service-name callq > param number-of-hunt-grps 1 > param number-of-hunt-grps 1 > param queue-len 10 > param drop-through-option 1 > paramspace english language en > param handoff-string aa > param max-time-vm-retry 2 > param aa-hunt1 4500 > paramspace english location flash: > param aa-pilot 4000 > param second-greeting-time 60 > param drop-through-prompt _bacd_welcome.au > param queue-manager-debugs 1 > param call-retry-timer 15 > ! > ! > ! > ! > ! > ! > archive > log config > hidekeys > ! > ! > ! > ! > ! > controller E1 0/0/0 > pri-group timeslots 1-4,16 service mgcp > ! > controller E1 0/0/1 > ! > controller T1 0/1/0 > framing esf > linecode b8zs > channel-group 0 timeslots 1-24 > description WAN CONNECTION- DO NOT CHANGE > ! > ! > ! > ! > ! > interface Loopback0 > ip address 10.10.110.3 255.255.255.255 > ip ospf network point-to-point > ! > interface Loopback1 > ip address 10.10.115.1 255.255.255.0 > ip ospf network point-to-point > ! > interface FastEthernet0/0 > no ip address > shutdown > duplex auto > speed auto > ! > interface Service-Engine0/0 > ip unnumbered Loopback1 > service-module ip address 10.10.115.2 255.255.255.0 > service-module ip default-gateway 10.10.115.1 > ! > interface FastEthernet0/1 > no ip address > shutdown > duplex auto > speed auto > ! > interface FastEthernet0/3/0 > description not used - keep shutdown > switchport trunk native vlan 301 > switchport mode trunk > switchport voice vlan 302 > spanning-tree portfast > ! > interface FastEthernet0/3/1 > description not used - keep shutdown > switchport trunk native vlan 301 > switchport mode trunk > switchport voice vlan 302 > spanning-tree portfast > ! > interface FastEthernet0/3/2 > description BR2 Phone 1- 7962 phone > switchport trunk native vlan 301 > switchport mode trunk > switchport voice vlan 302 > spanning-tree portfast > ! > interface FastEthernet0/3/3 > description BR2 Phone 2- 7962 phone > switchport trunk native vlan 301 > switchport mode trunk > switchport voice vlan 302 > spanning-tree portfast > ! > interface Serial0/0/0:15 > no ip address > encapsulation hdlc > isdn switch-type primary-net5 > isdn incoming-voice voice > no cdp enable > ! > interface Serial0/1/0:0 > no ip address > encapsulation frame-relay IETF > no fair-queue > frame-relay lmi-type ansi > ip rsvp bandwidth > ! > interface Serial0/1/0:0.1 point-to-point > ip address 10.10.112.2 255.255.255.0 > ip ospf mtu-ignore > snmp trap link-status > frame-relay interface-dlci 102 > ip rsvp bandwidth 112 > ! > interface Vlan1 > no ip address > ! > interface Vlan302 > ip address 10.10.202.1 255.255.255.0 > ! > router ospf 1 > router-id 10.10.202.1 > log-adjacency-changes > network 10.10.0.0 0.0.255.255 area 0 > ! > ip forward-protocol nd > ip route 10.10.115.2 255.255.255.255 Service-Engine0/0 > ip route 10.10.210.10 255.255.255.255 Null0 > ip route 10.10.210.11 255.255.255.255 Null0 > no ip http server > no ip http secure-server > ! > ! > ! > ! > ! > ! > ! > ! > ! > ! > control-plane > ! > ! > ! > voice-port 0/0/0:15 > translation-profile incoming did > ! > ccm-manager fallback-mgcp > ccm-manager redundant-host 10.10.210.10 > ccm-manager mgcp > ccm-manager music-on-hold > ccm-manager config server 10.10.210.11 > ccm-manager config > ! > mgcp > mgcp call-agent 10.10.210.11 2427 service-type mgcp version 0.1 > mgcp dtmf-relay voip codec all mode out-of-band > mgcp rtp unreachable timeout 1000 action notify > mgcp modem passthrough voip mode nse > mgcp package-capability rtp-package > mgcp package-capability sst-package > mgcp package-capability pre-package > no mgcp package-capability res-package > no mgcp package-capability fxr-package > no mgcp timer receive-rtcp > mgcp sdp simple > mgcp rtp payload-type g726r16 static > mgcp bind control source-interface Vlan302 > mgcp bind media source-interface Vlan302 > ! > mgcp profile default > ! > sccp local Vlan302 > sccp ccm 10.10.210.10 identifier 2 priority 2 version 5.0.1 > sccp ccm 10.10.210.11 identifier 1 priority 1 version 5.0.1 > sccp > ! > sccp ccm group 1 > associate ccm 1 priority 1 > associate ccm 2 priority 2 > associate profile 1 register sc-conf > associate profile 2 register sc-xcode > associate profile 3 register sc-mtp > switchover method immediate > switchback method immediate > switchback interval 3 > ! > dspfarm profile 2 transcode > codec g711ulaw > codec g711alaw > codec g729ar8 > codec g729abr8 > codec g729r8 > maximum sessions 4 > associate application SCCP > ! > dspfarm profile 1 conference > codec g711ulaw > codec g711alaw > codec g729ar8 > codec g729abr8 > codec g729r8 > codec g729br8 > maximum sessions 2 > associate application SCCP > shutdown > ! > dspfarm profile 3 mtp > codec g711ulaw > codec pass-through > rsvp > maximum sessions software 8 > associate application SCCP > ! > ! > dial-peer voice 5 pots > incoming called-number . > direct-inward-dial > ! > dial-peer voice 999 pots > translation-profile outgoing 911 > destination-pattern 999 > no digit-strip > port 0/0/0:15 > ! > dial-peer voice 2 pots > translation-profile outgoing local > destination-pattern 9[2-9]..... > port 0/0/0:15 > ! > dial-peer voice 4 pots > translation-profile outgoing inter > destination-pattern 900T > port 0/0/0:15 > ! > dial-peer voice 50 voip > translation-profile outgoing vm-redirect > destination-pattern 4220 > session protocol sipv2 > session target ipv4:10.10.115.2 > dtmf-relay sip-notify > codec g711ulaw > no vad > ! > dial-peer voice 5000 voip > service app-b-acd-aa > destination-pattern 4000 > incoming called-number 4000 > dtmf-relay h245-alphanumeric > codec g711ulaw > ! > dial-peer voice 1000 pots > service app-b-acd-aa > incoming called-number 4000 > ! > ! > sip-ua > mwi-server ipv4:10.10.115.2 expires 3600 port 5060 transport udp > unsolicited > ! > ! > ! > gatekeeper > shutdown > ! > ! > telephony-service > sdspfarm units 3 > sdspfarm transcode sessions 4 > sdspfarm tag 1 sc-conf > sdspfarm tag 2 sc-xcode > sdspfarm tag 3 sc-mtp > srst mode auto-provision all > srst ephone template 1 > srst dn template 1 > srst dn line-mode octo > max-ephones 10 > max-dn 15 > ip source-address 10.10.202.1 port 2000 > time-zone 42 > voicemail 4220 > mwi relay > max-conferences 8 gain -6 > moh music-on-hold.au > transfer-system full-consult > create cnf-files version-stamp 7960 Jun 30 2013 10:50:15 > ! > ! > ephone-dn-template 1 > call-forward busy 4220 > call-forward noan 4220 timeout 20 > mwi sip > ! > ! > ephone-template 1 > softkeys idle Newcall Cfwdall Redial > ! > ! > ephone-dn 1 octo-line > number 4001 > description +85224044001 > name SCPH1 > ephone-dn-template 1 > ! > ! > ephone-dn 2 octo-line > number 4002 > description +85224044002 > name SCPH2 > ephone-dn-template 1 > ! > ! > ephone-dn 3 octo-line > number 4003 > description +85224044003 > name SCPH3 > ephone-dn-template 1 > ! > ! > ephone-dn 4 octo-line > number 4004 > description +85224044004 > name SCPH4 > ephone-dn-template 1 > ! > ! > ephone-dn 5 octo-line > number *4001 > call-forward all 4200 > ! > ! > ephone 1 > device-security-mode none > mac-address 001B.D4C6.C2E4 > ephone-template 1 > speed-dial 4 *4001 label "Xfr-VM" > button 1:1 > ! > ! > ! > ephone 2 > device-security-mode none > mac-address 0024.142E.5078 > ephone-template 1 > button 1:2 > ! > ! > ! > ephone 3 > device-security-mode none > mac-address 0024.142E.504E > ephone-template 1 > button 1:3 > ! > ! > ! > ephone 4 > device-security-mode none > mac-address 001B.D4C6.950B > ephone-template 1 > button 1:4 > ! > ! > ephone-hunt 10 longest-idle > pilot 4500 > list 4003, 4004 > timeout 10, 10 > ! > ! > ! > line con 0 > exec-timeout 0 0 > logging synchronous > line aux 0 > line 194 > no activation-character > no exec > transport preferred none > transport input all > transport output all > line vty 0 4 > exec-timeout 0 0 > privilege level 15 > logging synchronous > no login > transport preferred none > transport input telnet > line vty 5 15 > exec-timeout 0 0 > privilege level 15 > logging synchronous > no login > transport preferred none > transport input telnet > ! > scheduler allocate 20000 1000 > ntp server 10.10.100.2 > end > > SiteC-RTR# > Jun 30 03:19:38.803: ISDN Se0/0/0:15 Q931: RX <- SETUP pd = 8 callref = > 0x00B5 > Bearer Capability i = 0x8090A3 > Standard = CCITT > Transfer Capability = Speech > Transfer Mode = Circuit > Transfer Rate = 64 kbit/s > Channel ID i = 0xA98381 > Exclusive, Channel 1 > Progress Ind i = 0x8583 - Origination address is non-ISDN > Display i = 'PSTN-SITEC-PHONE' > Calling Party Number i = 0x1080, '85225353333' > Plan:Unknown, Type:International > Called Party Number i = 0x80, '24044000' > Plan:Unknown, Type:Unknown > Jun 30 03:19:38.803: ISDN Se0/0/0:15 Q931: Received SETUP callref = 0x80B5 > callID = 0x000C switch = primary-net5 interface = User > SiteC-RTR# > Jun 30 03:19:38.819: ISDN Se0/0/0:15 Q931: TX -> RELEASE_COMP pd = 8 > callref = 0x80B5 > Cause i = 0x8090 - Normal call clearing > SiteC-RTR# > Jun 30 03:19:45.843: ISDN Se0/0/0:15 Q931: RX <- SETUP pd = 8 callref = > 0x00B6 > Bearer Capability i = 0x8090A3 > Standard = CCITT > Transfer Capability = Speech > Transfer Mode = Circuit > Transfer Rate = 64 kbit/s > Channel ID i = 0xA98381 > Exclusive, Channel 1 > Progress Ind i = 0x8583 - Origination address is non-ISDN > Display i = 'PSTN-SITEC-PHONE' > Calling Party Number i = 0x1080, '85225353333' > Plan:Unknown, Type:International > Called Party Number i = 0x80, '24044003' > Plan:Unknown, Type:Unknown > Jun 30 03:19:45.843: ISDN Se0/0/0:15 Q931: Received SETUP callref = 0x80B6 > callID = 0x000D switch = primary-net5 interface = User > SiteC-RTR# > Jun 30 03:19:45.863: ISDN Se0/0/0:15 Q931: TX -> CALL_PROC pd = 8 callref > = 0x80B6 > Channel ID i = 0xA98381 > Exclusive, Channel 1 > Jun 30 03:19:45.879: ISDN Se0/0/0:15 Q931: TX -> ALERTING pd = 8 callref = > 0x80B6 > Progress Ind i = 0x8188 - In-band info or appropriate now available > SiteC-RTR# > Jun 30 03:19:53.623: ISDN Se0/0/0:15 Q931: RX <- DISCONNECT pd = 8 callref > = 0x00B6 > Cause i = 0x8290 - Normal call clearing > Jun 30 03:19:53.627: ISDN Se0/0/0:15 Q931: TX -> RELEASE pd = 8 callref = > 0x80B6 > Jun 30 03:19:53.635: ISDN Se0/0/0:15 Q931: RX <- RELEASE_COMP pd = 8 > callref = 0x00B6 > SiteC-RTR# sh run > Building configuration... > > Current configuration : 10065 bytes > ! > ! Last configuration change at 11:17:36 HK Sun Jun 30 2013 > ! NVRAM config last updated at 10:55:49 HK Sun Jun 30 2013 > ! > version 12.4 > service timestamps debug datetime msec > service timestamps log datetime msec > service password-encryption > ! > hostname SiteC-RTR > ! > boot-start-marker > boot system flash:c2800nm-adventerprisek9-mz.124-22.T.bin > warm-reboot > boot-end-marker > ! > logging message-counter syslog > logging buffered 4096 > ! > no aaa new-model > memory-size iomem 20 > clock timezone HK 8 > network-clock-participate wic 0 > no network-clock-participate wic 1 > network-clock-select 1 E1 0/0/0 > ! > dot11 syslog > ip source-route > ! > ! > ip cef > ip dhcp excluded-address 10.10.202.1 10.10.202.10 > ip dhcp excluded-address 10.10.202.15 10.10.202.254 > ! > ip dhcp pool CME > origin file flash:/ciscolab.txt > default-router 10.10.202.1 > option 150 ip 10.10.210.11 10.10.210.10 > ! > ! > no ip domain lookup > no ipv6 cef > ! > multilink bundle-name authenticated > ! > ! > isdn switch-type primary-net5 > ! > ! > ! > voice service voip > allow-connections h323 to h323 > allow-connections h323 to sip > allow-connections sip to h323 > allow-connections sip to sip > ! > ! > ! > ! > ! > ! > ! > ! > ! > ! > ! > ! > ! > ! > ! > voice translation-rule 1 > rule 1 // // type any unknown plan any isdn > ! > voice translation-rule 2 > rule 1 // // type any subscriber plan any isdn > ! > voice translation-rule 3 > rule 1 // // type any national plan any isdn > ! > voice translation-rule 4 > rule 1 // // type any international plan any isdn > ! > voice translation-rule 5 > rule 1 /.*\(4...\)/ /\1/ > ! > voice translation-rule 11 > rule 1 /^3.../ /8522404&/ type any national plan any isdn > ! > voice translation-rule 12 > rule 1 /^3.../ /2404&/ type any subscriber plan any isdn > ! > voice translation-rule 13 > rule 1 /^3.../ /8522404&/ type any national plan any isdn > ! > voice translation-rule 14 > rule 1 /^3.../ /+8522404&/ type any international plan any isdn > ! > voice translation-rule 67 > rule 1 /^\*/ // > ! > ! > voice translation-profile 911 > translate calling 11 > translate called 1 > ! > voice translation-profile did > translate called 5 > ! > voice translation-profile int > translate calling 14 > translate called 4 > ! > voice translation-profile local > translate calling 12 > translate called 2 > ! > voice translation-profile national > translate calling 13 > translate called 3 > ! > voice translation-profile vm-redirect > translate redirect-called 67 > ! > ! > voice-card 0 > dspfarm > dsp services dspfarm > ! > ! > application > service app-b-acd-aa > param voice-mail 4200 > paramspace english index 0 > param max-time-call-retry 700 > param service-name callq > param number-of-hunt-grps 1 > param number-of-hunt-grps 1 > param queue-len 10 > param drop-through-option 1 > paramspace english language en > param handoff-string aa > param max-time-vm-retry 2 > param aa-hunt1 4500 > paramspace english location flash: > param aa-pilot 4000 > param second-greeting-time 60 > param drop-through-prompt _bacd_welcome.au > param queue-manager-debugs 1 > param call-retry-timer 15 > ! > ! > ! > ! > ! > > > -- > Thanks & Regard's > Amit Sharma > -------------- next part -------------- > An HTML attachment was scrubbed... > URL: </archives/ccie_voice/attachments/20130630/a0950275/attachment.html> > > ------------------------------ > > _______________________________________________ > CCIE_Voice mailing list > CCIE_Voice@onlinestudylist.com > http://onlinestudylist.com/mailman/listinfo/ccie_voice > > > End of CCIE_Voice Digest, Vol 88, Issue 146 > ******************************************* >
_______________________________________________ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
