Thanks for ur reply,Usually the order configured in Cisco CallManager for outbound calls is the opposite of the Telco for inbound calls in order to increase the likelihood of available channels.
On Wed, Jul 3, 2013 at 12:29 PM, LorenzLGRC <lorenzl...@gmail.com> wrote: > Hello, > as far as i know the B channel selection order is not bound to your telco > configuration. > You can set top-down or bottom-up with no issue at all. > > hth > lorenz > > > On Wed, Jul 3, 2013 at 10:58 AM, CISCO CCIE VOICE > <ccievoic...@gmail.com>wrote: > >> Hi Guys, >> >> I am trying to understand the "Channel selection order", i know that if >> TELCo is using bottom Up then i have to use opposite Direction i.e Top >> Down .My Telco is uses last channel for IN-bound calls and set Top down on >> my side for OUT-bound calls but still i can see that its taking bottom up >> for out bound calls,so did i miss any thing ? can any one share there >> knowledge and experience as to how i can configure it >> >> >> Thanks >> >> >> _______________________________________________ >> For more information regarding industry leading CCIE Lab training, please >> visit www.ipexpert.com >> >> Are you a CCNP or CCIE and looking for a job? Check out >> www.PlatinumPlacement.com >> > >
_______________________________________________ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com