hi All, I have the following config for srst...
telephony-service srst mode auto-provision all srst dn line-mode octo max-ephones 10 max-dn 10 ip source-address <cme ip address> port 2000 live-record 4700 voicemail 4220 max-conferences 8 gain -6 moh music-on-hold.au transfer-system full-consult ! ephone-dn-template 1 call-forward busy 4220 call-forward noan 4220 timeout 20 mwi sip ephone-dn 1 octo-line number 4001 description +85224044001 name +85224044001 ephone-dn 2 octo-line number 4002 description +85224044002 name +85224044002 ephone-dn 3 octo-line number 4101 ephone-dn 4 octo-line number 4102 ephone-dn 8 number *4001 call-forward all 4220 ephone-dn 10 octo-line number 4700 call-forward all 4220 ! ephone-dn 1 octo-line number 4001 description +85224044001 name +85224044001 ephone-dn 2 octo-line number 4002 description +85224044002 name +85224044002 ephone-dn 3 octo-line number 4101 ephone-dn 4 octo-line number 4102 ephone-dn 8 number *4001 call-forward all 4220 ephone-dn 10 octo-line number 4700 call-forward all 4220 ephone 1 mac-address XXXXXXX button 1:1 2:3 ephone 2 mac-address XXXXXXX button 1:2 2:4 ephone-hunt 1 longest-idle pilot 4010 list 4101, 4102 timeout 10, 10 1)When in srst if I make changes to the line level of the ephone-dn and then take the phones out of srst and register it with CUCM and then back into srst then I notice that the 4001 and 4002 lines disappear from the phones and I can't apply if back. Has anyone faced this issue? 2)Any solution? How does my config look? -MJ
_______________________________________________ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com