I think there is a bug with that. Change it to huntstop ch 2 and test. If it works change ios.
On 29/07/2013, at 10:51 AM, "ccie_voice-requ...@onlinestudylist.com" <ccie_voice-requ...@onlinestudylist.com> wrote: > Send CCIE_Voice mailing list submissions to > ccie_voice@onlinestudylist.com > > To subscribe or unsubscribe via the World Wide Web, visit > http://onlinestudylist.com/mailman/listinfo/ccie_voice > or, via email, send a message with subject or body 'help' to > ccie_voice-requ...@onlinestudylist.com > > You can reach the person managing the list at > ccie_voice-ow...@onlinestudylist.com > > When replying, please edit your Subject line so it is more specific > than "Re: Contents of CCIE_Voice digest..." > > > Today's Topics: > > 1. Re: call-manager fall back issue (IE Target) > 2. Re: Lab 4A BR1 MGCP Issue (Alex Pishko) > 3. IP voice media streaming app service down on AMD whitebox > (Amdo Ngawa) > > > ---------------------------------------------------------------------- > > Message: 1 > Date: Sun, 28 Jul 2013 22:29:44 +0530 > From: IE Target <myfrnd...@gmail.com> > To: Edgar Feliz <ejzi...@gmail.com>, aman sinha <aman.i...@gmail.com> > Cc: "ccie_voice@onlinestudylist.com" <ccie_voice@onlinestudylist.com> > Subject: Re: [OSL | CCIE_Voice] call-manager fall back issue > Message-ID: > <cajouvjsbo42denn3zyzf9talrgtj101_yj8stw-ii-c4sbs...@mail.gmail.com> > Content-Type: text/plain; charset="iso-8859-1" > > *Todd Carswell :: Ya* the phones were registered with dn before they fail > to SRST > > *Aman ::*The link given by aman tells that it is firmware mismatch issue. > But i remember using the same IOS and same CUCM version before without any > issues > > Edgar Feliz :: Tried restating the router already. I have seen similar > issue in CME as > SRST which is easily solved by restarting but in call-manager-fallback it > is not helping > .This is the first time i faced the problem > > Bill : The configuration is as follows > > > > The config look like this > > call-manager-fallback > > secondary-dialtone 9 > > max-conferences 8 gain -6 > > transfer-system full-consult > > ip source-address 142.102.65.254 port 2000 > > max-ephones 2 > > max-dn 5 octo-line > > transfer-pattern .T > > voicemail 2220 > > huntstop channel 1 > > call-forward pattern .T > > call-forward busy 2220 > > call-forward noan 2220 timeout 20 > > moh en_bacd_music_on_hold.au > > time-zone 8 > > > On Sun, Jul 28, 2013 at 9:29 PM, Edgar Feliz <ejzi...@gmail.com> wrote: > >> Register phones back to CM before restarting. >> >> Sent from my iPhone >> >> On Jul 28, 2013, at 9:10 AM, Todd Carswell <tcar0...@gmail.com> wrote: >> >>> Were the phones registered to CM with DNs assigned BEFORE they failed >> over to SRST? >>> >>> --Todd >>> >>> On Jul 28, 2013, at 5:56, IE Target <myfrnd...@gmail.com> wrote: >>> >>>> Facing this issue plz help >>>> >>>> When sb phone fall back to SRSt(call-manager fallback) >>>> >>>> They show registered in show ephone >>>> BUT >>>> they do not get any dn >>>> I tried reloading router, factory reset and every thing >>>> >>>> What is the solution . Has any one faced problem like this >>>> plz reply >>>> _______________________________________________ >>>> For more information regarding industry leading CCIE Lab training, >> please visit www.ipexpert.com >>>> >>>> Are you a CCNP or CCIE and looking for a job? Check out >> www.PlatinumPlacement.com >>> _______________________________________________ >>> For more information regarding industry leading CCIE Lab training, >> please visit www.ipexpert.com >>> >>> Are you a CCNP or CCIE and looking for a job? Check out >> www.PlatinumPlacement.com > -------------- next part -------------- > An HTML attachment was scrubbed... > URL: </archives/ccie_voice/attachments/20130728/f6a94b65/attachment-0001.html> > > ------------------------------ > > Message: 2 > Date: Sun, 28 Jul 2013 13:16:10 -0400 > From: Alex Pishko <alexpis...@yahoo.com> > To: ccie2k12 <ccie2...@gmail.com> > Cc: "<ccie_voice@onlinestudylist.com>" > <ccie_voice@onlinestudylist.com> > Subject: Re: [OSL | CCIE_Voice] Lab 4A BR1 MGCP Issue > Message-ID: <0a8f8d12-747e-4aa8-92bd-1021a783d...@yahoo.com> > Content-Type: text/plain; charset="us-ascii" > > Thanks, removing the l3 bind, doing a shut, no shut on the serial interface > then adding the l3 bind statement back in did it. > > Thank you, much appreciated. > > On Jul 28, 2013, at 7:42, "ccie2k12" <ccie2...@gmail.com> wrote: > >> try removing >> >> ccm-manager config server 10.10.210.11 >> ccm-manager config >> >> and remove >> isdn bind-l3 ccm-manager >> and put it back again. >> >> also >> BR1 >> pri-group timeslots 1-3,24 >> PSTN >> pri-group timeslots 1-3,23-24 >> >> should be same. >> >> >> From: ccie_voice-boun...@onlinestudylist.com >> [mailto:ccie_voice-boun...@onlinestudylist.com] On Behalf Of Alex Pishko >> Sent: Saturday, July 27, 2013 11:39 PM >> To: ccie_voice@onlinestudylist.com >> Subject: [OSL | CCIE_Voice] Lab 4A BR1 MGCP Issue >> >> All, >> >> Struggling with the MGCG PRI circuit in this lab. I've been through it a >> few times and never had issues, however for this go around I cannot seem to >> get L2 up when I issue the show isdn status command. Also, when I look at >> the serial inteface is shows up/up, however it's up/up (spoofing). >> >> The MGCP portion appears to be workign correctly as when I issue a show >> ccm-manager command I see it registered to the primary and within CUCM I see >> the PRI as registered. Below is my relevant configuration from the BR1 >> Router as well as the PSTN router. Also, on the PSTN I've tried to change >> the pri-group to just 1-3,24 both had the same result. Also, when I issue >> debug isdn q921 command I do not see any response for the SAMBE packet. Any >> help on this would be much appreciated. I'm starting to think I may have a >> hardware problem, but need a second or multiple sets of eyes on this before >> I head down that router. >> >> Thank you all. >> >> Alex >> >> BR1 Router >> >> network-clock-participate wic 1 >> network-clock-select 1 T1 0/1/0 >> >> controller T1 0/1/0 >> framing esf >> linecode b8zs >> cablelength long 0db >> pri-group timeslots 1-3,24 service mgcp >> description **T1 Voice Connection to PSTN 0/1/1** >> >> interface Serial0/1/0:23 >> no ip address >> encapsulation hdlc >> isdn switch-type primary-ni >> isdn incoming-voice voice >> isdn bind-l3 ccm-manager >> no cdp enable >> >> voice-port 0/1/0:23 >> ! >> ccm-manager switchback immediate >> ccm-manager redundant-host 10.10.210.10 >> ccm-manager mgcp >> ccm-manager music-on-hold >> ccm-manager config server 10.10.210.11 >> ccm-manager config >> ! >> mgcp >> mgcp call-agent 10.10.210.11 2427 service-type mgcp version 0.1 >> mgcp rtp unreachable timeout 1000 action notify >> mgcp modem passthrough voip mode nse >> mgcp package-capability rtp-package >> mgcp package-capability sst-package >> mgcp package-capability pre-package >> no mgcp package-capability res-package >> no mgcp timer receive-rtcp >> mgcp sdp simple >> mgcp rtp payload-type g726r16 static >> mgcp bind control source-interface Loopback0 >> mgcp bind media source-interface Loopback0 >> >> >> PSTN Router >> >> network-clock-participate wic 1 >> >> controller T1 0/1/1 >> framing esf >> clock source internal >> linecode b8zs >> cablelength long 0db >> pri-group timeslots 1-3,23-24 >> description **T1 VOICE CONNECTION TO BR1-RTR 0/1/0** >> >> interface Serial0/1/1:23 >> no ip address >> encapsulation hdlc >> isdn switch-type primary-ni >> isdn protocol-emulate network >> isdn incoming-voice voice >> no cdp enable >> >> voice-port 0/1/1:23 >> translation-profile incoming block-call-into-BR1 >> translation-profile outgoing display-proper-ani-into-BR1 > -------------- next part -------------- > An HTML attachment was scrubbed... > URL: </archives/ccie_voice/attachments/20130728/8cb234e5/attachment-0001.html> > > ------------------------------ > > Message: 3 > Date: Sun, 28 Jul 2013 20:21:17 -0400 > From: Amdo Ngawa <datapack...@gmail.com> > To: "ccie_voice@onlinestudylist.com" <ccie_voice@onlinestudylist.com> > Subject: [OSL | CCIE_Voice] IP voice media streaming app service down > on AMD whitebox > Message-ID: > <CA+d2o73EP4=__Y9C+=w9ppfptlwwekaw1fv1uyhtmy3o+ca...@mail.gmail.com> > Content-Type: text/plain; charset="iso-8859-1" > > Hi Friends: > > I am running Esxi 5 on my Gigabtye AMD machine. I found in the CUCM > features that my IP voice media streaming app service is activated but > never runs despite starting it. I seem to have issues with my CUE jtapi > registering very infrequently; CUE route points not registering etc. I > don't know if the above service has attributed to this issue. > > It so happens that AMD motherboard and chipset are affected with the above > service failing. SEE > http://www.fatturtle.com/2010/06/ip-voice-media-streaming-app-service-wont-start/ > > I tried various methods including the above in vain. I have an older backup > whitebox build on Intel platform that has no issues, but limited to DDR2 8 > gb ram (DDR2 very expensive). Will it be possible to practice the full lab > on 8 gb memory? Can I configure PUB, SUB, CUC, UCCX, CUPS with 1.5 gb each? > > Thanks > Amdo > -------------- next part -------------- > An HTML attachment was scrubbed... > URL: </archives/ccie_voice/attachments/20130728/c6d585cc/attachment.html> > > ------------------------------ > > _______________________________________________ > CCIE_Voice mailing list > CCIE_Voice@onlinestudylist.com > http://onlinestudylist.com/mailman/listinfo/ccie_voice > > > End of CCIE_Voice Digest, Vol 89, Issue 100 > ******************************************* _______________________________________________ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
