Are there any other voice ports on this mgcp gw (pri) and is the gateway registered to cucm (show ccm-manager). If not, you need to fix that first, start with the commands below and allow cucm to build the rest of the cli:
Ccm config server (ip address) Ccm config (If you have "ip domain-name..." set on router cli make sure cucm is configured with fqdn such as routerhostname.domainname.com or it won't register) Beyond gw registration, there is more config on the cli not shown on your email - do you have dial peers? (Show dial-peer voice summary). If not, you'll need something similar to this: Dial-peer voice 1 pots Application MGCPAPP Port 0/1/0 Dial-peer voice 2 pots Application MGCPAPP Port 0/1/1 The link below shows a sample config of setting up an fxs/fxo port on an ios gw. Have you already read this (or similar) and completed all steps? http://www.cisco.com/en/US/products/sw/voicesw/ps556/products_tech_note09186a008017787b.shtml The study list would be able to help more if you post your full config and provide more detail about what is working and what is not. More things to check and provide info to the group so we can help: Gw registered? Any other pri on gw working? Cucm conf good - gw, route pattern, etc and DNA says it will route the call outbound? Are both inbound and outbound fax calls failing or just one way? Can you call the fax on net (from an ip phone or other analog device) and it rings? What codecs and are you using modem passthru/relay? Lan only or lan and wan between 2 fax or fax and pstn?) On Aug 20, 2013 6:18 AM, "Dharambir kumar varma" <dharambi...@gmail.com> wrote: > Hi > > My faxes are not working... > where should i check....My router is MGCP gateway... > > Below are config on Mgcp router.. > > voice-port 0/1/0 > description >>>> Cheadle FAX <<<< > station-id name Cheadle FAX > station-id number 5867 > caller-id enable > ! > voice-port 0/1/1 > station-id name Cheadle FAX > station-id number 5869 > caller-id enable > -- > Regards, > Dharambir Kumar > _______________________________________________ > For more information regarding industry leading CCIE Lab training, please > visit www.ipexpert.com > > Are you a CCNP or CCIE and looking for a job? Check out > www.PlatinumPlacement.com >
_______________________________________________ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com