Hello guys
Could you please share your thoughts on this simple question.
When I used mgcp on a gw the ip phone shows the called number without 9.
but if I used H323 the called number on ipphone's shows the called number with 9, because all my dial-peer starts with 9 for SRST.
My doubt is when im using a rute-list for TEHO or fileover on a specific route pattern.
For example
site a users dial 9555777, match my route pattern 9.[2-9]XXXXXX, at this level I strip off the 9 on the Called Party Transformations.
the route-patter have the Route-list sitea-fileover-siteb.
first choice is SiteA (MGCP) route-group, set the calling to subscriber, 7 digits ani, and set called to sub 7 digits.
at this path the ip phones shows "To 5557777"
second choice is siteb (h323) route-group, set the calling to subscriber, 7 digits ani, and set the called with pre-dot, prefix 91212, to match the dial-peer.
at this path the ip phones shows "To 912125557777"
If on real lab ask me to do a similar route-pattern I'll loose points if both paths doesn't shows "To 5557777" or it doesn't matter.
sorry for my bad english.
best regards!
AM
_______________________________________________ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com
Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
