You could try leaving the message for the phone w/ cupc, then on the phone dial the DN of the MWI-off (eg, 1999 in IPexpert labs). I'm not sure if dialing the MWI off/on number on the phones even touches the CUC server, but it's possible - if it does sync to CUC in this case then the CUPC MWI would go off and that wouldn't solve your question.
This may not be the ideal solution, even if it works, as I would expect that if you powered off the whole system/rack and then back on that the phone/CUC would sync the MWI status (still "unread" on CUC) and both the phone and CUPC would then show the MWI light. I don't know whether the pod racks are power cycled before grading and I'm not going to "hope" that they don't power cycle as a strategy. Alternatively, if you need to show a "message" and it's not explicitly stated as a "voicemail" or a "MWI" then you may be able to meet the requirement by showing a new IM as a "message" from the IPPM phone service to the CUPC user. HTH... Justin On Sat, Dec 7, 2013 at 5:47 PM, Barrera, Hugo <hugo.barr...@nexusis.com>wrote: > Hi, > > > > If all MWI’s need to be left off and one of my ip phones is integrated > with CUPC and the CUPC client needs to show a message indication what is > the trick? > > > > *Thanks * > > > > _______________________________________________ > Free CCIE R&S, Collaboration, Data Center, Wireless & Security Videos :: > > iPexpert on YouTube: www.youtube.com/ipexpertinc >
_______________________________________________ Free CCIE R&S, Collaboration, Data Center, Wireless & Security Videos :: iPexpert on YouTube: www.youtube.com/ipexpertinc
