Do you have the command Mgcp dtmf codec all out
In your mgcp config From: Vignesh Sethuraman <sethuvign...@gmail.com<mailto:sethuvign...@gmail.com>> Date: Tuesday, January 21, 2014 at 1:51 PM To: ccievoice <ccie_voice@onlinestudylist.com<mailto:ccie_voice@onlinestudylist.com>> Subject: [OSL | CCIE_Voice] no DTMF Relay to UC via PSTN during HA (testing AAR) Hello All, Unity Connection not recognizing the password (no DTMF) when the call is routed as following during a high availability situation. SiteB PH2/PH3 ---> MGCP T1 Port of SiteB GW ----> My PSTN GW (use to switch call between all sites via pots dialpeers) -----> SiteA H323 GW -----> CUCM SUB ----> Unity Connection. * The Unity Connection is playing Message -- Enter you PIN * Unity Connection recognizes SiteB PH2 is a registered user's number , so asks for password * When pressing password unity connection does not recognize that any key is pressed I am facing the same issue as mentioned in the below link but I am using Skinny integration of CUC to CUCM. http://onlinestudylist.com/archives/ccie_voice/2013-August/085101.html Please let me know what I am missing. Thanks, Viki
_______________________________________________ Free CCIE R&S, Collaboration, Data Center, Wireless & Security Videos :: iPexpert on YouTube: www.youtube.com/ipexpertinc