Hello All, I could not get this question solved as per the solution mentioned in the Proctor guide.
The SRST fallback incoming call at extn 1003 from PSTN hit the VM but I don't get the Subscriber greeting but get a default message From a touch tone telephone dial any extn. I followed the OSL mail archive link and added "isdn outgoing ie redirecting-number" under the serial interface. https://www.mail-archive.com/ccie_voice@onlinestudylist.com/msg13745.html But still its not working. Could you please someone tell me what I am missing. Here is my config. voice register pool 1 id network 10.10.201.0 mask 255.255.255.0 call-forward b2bua busy 5600 call-forward b2bua noan 5600 timeout 8 ! voice translation-rule 1003 rule 1 /^1002$/ /1003/ ! voice translation-profile REDIRECT translate redirect-called 1003 ! call-manager-fallback max-conferences 8 gain -6 transfer-system full-consult ip source-address 2.2.2.2 port 2000 max-ephones 10 max-dn 20 after-hours block pattern 1 91900 7-24 voicemail 5600 call-forward busy 5600 call-forward noan 5600 timeout 8 moh "music-on-hold.au" multicast moh 239.1.1.1 port 16384 route 2.2.2.2 cor incoming CSS-LD default cor incoming CSS-LD 1 1002 ! dial-peer voice 5600 pots translation-profile outgoing REDIRECT destination-pattern 5600$ no digit-strip port 0/0/0:23 prefix 1212394 ! ! interface Serial0/0/0:23 no ip address encapsulation hdlc isdn switch-type primary-ni isdn incoming-voice voice isdn outgoing ie redirecting-number no cdp enable ! Thanks, Viki
_______________________________________________ Free CCIE R&S, Collaboration, Data Center, Wireless & Security Videos :: iPexpert on YouTube: www.youtube.com/ipexpertinc
