Make sure the PRI is "up" on your router as well: Show isdn status
L2 should say 'multiple frame established' and if it doesn't you have an issue. It would likely say 'tei assigned' when there's a problem. On an mgcp gw the L3 status should say 'cucm manager'. Troubleshooting guide here: http://www.cisco.com/c/en/us/support/docs/wan/t1-e1-t3-e3/8131-T1-pri.html If the PRI is "up" and you still have issues then its likely call routing in cucm. Check the css on the pri for inbound and your route patterns/partitions and the line or device cuss on phones for outbound. -Justin (Sent from my phone, please excuse and/or laugh at any typos.) On Apr 22, 2014 9:12 AM, "vikas wankhede" <vikaswankh...@gmail.com> wrote: > Try below debug, it may help, > > debug voice ccapi inout > debug isdn q931 detail > debug isdn q921 detail > > Thanks. > > > On Mon, Apr 21, 2014 at 6:48 PM, Dharambir kumar varma < > dharambi...@gmail.com> wrote: > >> Hi All >> >> Last week, >> >> I was unable to make ougoing pstn call,even no incoming call. >> but service provider telling that pstn line was ok.how can I check on >> cucm, >> gateway Mgcp/2811 >> >> what message it displays in cucm logs. >> >> -- >> Regards, >> Dharambir Kumar >> >> >> >> >> >> _______________________________________________ >> Free CCIE R&S, Collaboration, Data Center, Wireless & Security Videos :: >> >> iPexpert on YouTube: www.youtube.com/ipexpertinc >> > > > _______________________________________________ > Free CCIE R&S, Collaboration, Data Center, Wireless & Security Videos :: > > iPexpert on YouTube: www.youtube.com/ipexpertinc >
_______________________________________________ Free CCIE R&S, Collaboration, Data Center, Wireless & Security Videos :: iPexpert on YouTube: www.youtube.com/ipexpertinc
