> 1. Yes, it looks complete. Obviously it isn't. As the _Stop_All_Projects/_Start_All_Projects projects were not recognized i ran ccnet.exe. Unfortunately the output isn't of any help to me.
[CCNet Server:ERROR] Exception: Unused node detected: <cruiseServerControl><acti ons><controlAction><project>*</project><type>StopProject</type></ controlAction>< /actions></cruiseServerControl> What did I do wrong? TIA, Markus On 13 Mrz., 10:04, "Craig & Sammi Sutherland" <[email protected]> wrote: > Hi Markus, > > Answers to your questions: > 1. Yes, it looks complete. > > 2. It would send multiple stop commands (since the task does not check the > current status). However, when the server gets these commands, it would > ignore them, since the projects are already stopped (the single exception > will the stop-all project, since doing a force build automatically re-starts > it.) > > 3. This is similar to #2 - since the projects are already started, it would > ignore the commands. > > 4. You shouldn't. The start/stop commands are the same as pressing the > start/stop button on the dashboard - it will not perform a build (unless the > project has been configured to build on start-up.) > > Craig > > > > -----Original Message----- > From: [email protected] [mailto:[email protected]] On > > Behalf Of MarkusW > Sent: Saturday, 13 March 2010 2:21 a.m. > To: ccnet-user > Subject: [ccnet-user] Re: Stop all projets at once > > Hi Craig, > > looks like you just implemented exactly what I was looking for. :-) > Now a few questioons came up. > > 1. I'd use this XML markup for a "stop all" project. Is it correct and > complete? > > <project name="_Stop_All_Projects" category="Others" > queue="General"> > <webURL>http://buildserver/ccnet/</webURL> > <workingDirectory>C:\AutomatedBuild</workingDirectory> > <artifactDirectory>C:\AutomatedBuild\Output\Others > \_Stop_All_Projects</artifactDirectory> > <state type="state" directory="C:\AutomatedBuild\Output" /> > <!-- A force build of this project sends a STOP command to > all > projects. --> > <cruiseServerControl> > <actions> > <controlAction> > <project>*</project> > <type>StopProject</type> > </controlAction> > </actions> > </cruiseServerControl> > </project> > > 2. What happens when a user hits the [Force] button of the "stop all" > project on the web dashboard several times in a row? > > 3. Can something bad happen when a user hits the [Force] button of the > "start all" project on the web dashboard while all projects are > running? > > 4. Most of our projects are running an interval trigger. A few are > "force build only". Will I run into problems? > > TIA, > > Markus Winhard > > On 12 Mrz., 09:07, "Craig & Sammi Sutherland" > <[email protected]> wrote: > > Hi Markus, > > > This is a good idea and one that is reasonably easy to implement - so I > have > > added it to the latest build. > > > As an example, you can now use the following task to stop all the projects > > on a server: > > <cruiseServerControl> > > <actions> > > <controlAction> > > <project>*</project> > > <type>StopProject</type> > > </controlAction> > > </actions> > > </cruiseServerControl> > > > The project uses the standard Windows wildcard mappings - i.e. * and ?. > You > > can use these to build a "pattern" of projects to apply the commands to > > (e.g. "*-Build", "Project?", etc.) > > > If you want a client-side app, the options are using something like > > FastForward.NET (as suggested by Christophe - available > fromhttp://www.ohloh.net/p/FastForwardNET/download) or building your own > custom > > program (as suggested by Ruben). > > > One thing to note with these (and any other approach for sending a stop > > command), the stop command will change the project state to Stopping. If > > there is a build in progress it will remain in this state until the build > > has finished and then transition to Stopped. If there is no build it will > > change immediately to Stopped. So if the stop command does not work > > immediately, this is probably why. > > > Hope this helps, > > > Craig > > > -----Original Message----- > > From: [email protected] [mailto:[email protected]] On > > > Behalf Of MarkusW > > Sent: Friday, 12 March 2010 7:11 a.m. > > To: ccnet-user > > Subject: [ccnet-user] Re: Stop all projets at once > > > What about using a star for the project name or an empty project > > name? > > e.g. <controlAction type="StopProject" project="*" /> > > Will this automatically stop all projects? > > > Markus > > > On 11 Mrz., 10:32, JayFleming <[email protected]> > > wrote: > > > Hi Markus, > > > > If you're on version 1.5+ you could have a control project that ran > > > multiple CruiseServerControl tasks to shut down all the projects from > > > one > > clickhttp://confluence.public.thoughtworks.org/display/CCNET/CruiseServer+.. > > .. > > > > There is the pain of setting up the 50+ tasks initially, but it could > > > be more practical in the end...the control project could just be > > > scheduled to shut everything down 5 minutes before your source VM is > > > taken offline. > > > > Cheers, > > > Jay- Zitierten Text ausblenden - > > > - Zitierten Text anzeigen -- Zitierten Text ausblenden - > > - Zitierten Text anzeigen -
