Dear Petr, Yes, please do send the log files, MTZ file and anything else needed to run the job that shows the problem, so we can track it down. It's probably best to send them off-line.
We couldn't reproduce Alexander's problem, but he tells me that it only occurs "when the script is started from a mono application" (and I confess that I don't really know yet what that means). Once the problem he ran into has been defined a bit better, we can look into whether it's something we can fix on our end. Regards, Randy Read On 6 Sep 2011, at 08:25, Petr Leiman wrote: > Dear Randy and the Phaser team, > > Phaser 2.3.0 brought us several enhancement, but similar to Alexander > Schiffer's experience, Phaser has failed several times now with a floating > point exception error at different stages of automated MR: it has stopped in > the beginning of RF and then in a new run it stopped in the middle of TF. The > remedy is to explicitly lower the resolution of the input data (that was a > 1.2 A resolution data with a smallish unit cell). > > I can provide the log files and the mtz file if necessary. > > Sincerely, > > Petr > ----------------------- > Petr Leiman > EPFL > IPSB-LBBS > BSP-415 > CH-1015 Lausanne, Suisse > http://lbbs.epfl.ch ------ Randy J. Read Department of Haematology, University of Cambridge Cambridge Institute for Medical Research Tel: + 44 1223 336500 Wellcome Trust/MRC Building Fax: + 44 1223 336827 Hills Road E-mail: rj...@cam.ac.uk Cambridge CB2 0XY, U.K. www-structmed.cimr.cam.ac.uk