On Tue, Jun 16, 2015 at 04:28:16AM +0000, tony duell wrote: > > I am of course counting all the transistors inside that chip.
Well, that was obvious. But it raises an interesting point, today you can cram a whole computer in the footprint of the simplest DIP carrier. For the same price point and same reliablity. Is it then overkill if you choose to use thousands of those transistor over using just 10 ? Similar to Mark's example of using just the first bytes of an SD card with gigabytes of storage. > This is one of my main dislikes with USB. It is so complicated that you > have to use a microcontroller. Unlike any of the more sane interfaces that > you can implement with simple logic if you want to. I completely agree, I detest USB for various reasons. However consider this: As I said, I have used the Teensy to interface an old 11/70 front panel with simh. One possibility I've considered is to let the Teensy present itself as USB mass storage when first attached to a PC. On this mass storage I would put a special version of simh and 11/70 system images. When this version of simh is run, it will instruct the Teensy to present itself as the front panel interface instead. So, I can bring my 11/70 front panel to any friend with a suitable computer and show him/her the ropes :) Admittedly, the Teensy doesn't have enough storage for this, but it shows the flexibilty of USB coupled with a microcontroller. /P