On 07/14/2015 04:49 PM, Jay Jaeger wrote:
Not necessarily. For example, it is impossible to find an IBM 1410, as
far as I know. But there ARE 1415 consoles I knew of a while back, and
there are certainly 729s and 1403 printers and 1402 card read/punch
units up and running.
There are plenty of machines that are impossible to find. And many that
are gone that are quite novel. That IBM sold so many is something in
their favor, but how about a working Saxpy box--which is quite a bit
more recent than your 1410? Or the STAR-65, 1B or even -100. The only
65 was moved from Canada and scrapped. My department had the only two
1Bs and I saw those go under the sledgehammer and bolt cutters. I don't
think that there are STAR-100s of any stripe (plain, -A, -B or -C)
left--they were just too big. Are there any BSPs or ASC's kicking around?
There are tons of lost non-IBM peripherals.
But we do have documentation on many of these things, so at least we
know "how" they worked. And I submit that in the long run, that's what
matters. There's very little relevant to the state of the art today
that really matters. (Boy, am I going to get flamed on that)
Software "just make it work" emulator. (Most of SimH stuff seems to be
at this level).
Or dedicated simulators (non-SIMH). Often, all you have is the system
documentation that talks about the instruction set and a few binary
files. Reverse-engineering can be fun and valuable.
That is why I use VHDL (or Verilog is fine to). So that those models
are portable into the future. The FPGA part doesn't matter so much,
but the model future portability does matter.
Maybe, but I'd rather read the design documents than a pile of HDL of
any stripe.
1403's and IBM 729's and 1402 card read/punch still exist. I seem to
recall the CHM doing something like building a 729 tape drive tester, too.
But there were LOTS of those. Try something non-IBM and very obscure.
But something like the SBG 6120 PDP-8 is closer, potentially with real
lights and switches. As another I example, I can envision an FPGA
sitting inside a real IBM 1415 console, running it's lights, responding
to it's switches and interacting with it's selectric typewriter.
Probably more than I will accomplish, but it is good to have goals.
A PDP-8 is a simple CPU, probably popular because of the lights and
switches. I see evidence that these were eye candy--the DECStations are
practically the same thing, but apparently not nearly as desirable.
Seymour Cray should have used kinetic sculptures on his machines as part
of eye candy, I guess. Or maybe more chrome...
--Chuck
