> -----Original Message----- > From: cctalk [mailto:cctalk-boun...@classiccmp.org] On Behalf Of John > Wilson > Sent: 10 August 2015 22:05 > To: General Discussion: On-Topic and Off-Topic Posts > <cctalk@classiccmp.org> > Subject: Re: MTS > > On Mon, Aug 10, 2015 at 01:24:41PM -0700, Lyndon Nerenberg wrote: > >I think there might be enough there to IPL and perform a basic > >installation, but what immediately caught my attention was the mention > >that sites had to purchase ASMH from IBM, which leads me to believe the > >public distributions don't contain an assembler. > > I assume you're saying that the real MTS sites bought *ASMH back in the old > days, not that it's possible for mere mortals to buy a license for home > emulator use nowadays at a finite price?
That is correct, they bought Assembler H. There are Assembler H compatible alternatives such as:- http://tachyonsoft.com/ and even http://z390.org/ but neither of these have the MTS extensions, and the MTS folks say these are needed to re-configure MTS > > I'd love to be wrong (and I'd gladly pay four digits, as long as it's one-time and > not per-year). It'd be hard to get very far w/o *ASMH (it's horrible but it's > the standard, and MTS had plenty of languages I miss less), and writing a > clean/legal reimplementaation now would only take, say, 5000 person-years. > As I say there are at least two clean replacements, but they don't have the MTS extras. However as Hercules allows you to change the config then the major need for MTS Assembler H has gone away. Some folks have also worked out how to patch some of the MTS tables to change the I/o so again reducing the need. All this has meen discussed in the H390-MTS group so its worth joining and reading the info there.. > John Wilson > USERHA8G@RPITSMTS.Bitnet Dave Wade G4UGM (once upon a time PM27 on the Newcastle Upon Tyne MTS system)