Nice one! A big'un and fully loaded, too! You tried this procedure? Always worked for me.
http://h71000.www7.hp.com/openvms/journal/v1/atw.pdf Best, Sean On Wed, Aug 26, 2015 at 2:25 PM, Kyle Owen <kylevo...@gmail.com> wrote: > Just picked up a very complete MicroVAX 3800. I have very little experience > with VMS as this is my first VAX. Mostly a PDP-8 guy, I suppose. > > I'm running through the change password procedure, which I had seen > mentioned previously on this list: > > SET VAXCLUSTER 0 > SET /STARTUP OPA0: > SET WRITESYSPARAMS 0 > CONTINUE > > SET NOON > SPAWN /NOWAIT SYS$SYSTEM:STARTUP.COM > SET DEFAULT SYS$SYSTEM > RUN AUTHORIZE > > At this point, I get this: > %DCL-W-ACTIMAGE, error activating image SECURESHRP > -CLI-E-IMGNAME, image file > R7CY2A$DIA0:[SYS0.SYSCOMMON.][SYSLIB]SECURESHRP.EXE;2 > -SYSTEM-F-PROTINSTALL, protected images must be installed > $ > > What would I need to do to correct it to login? > > The eventual goal is to get this online, which should be feasible. I have > an AUI-to-10Base-T adapter (several, actually). I think that'll be a little > while away for now, though. > > Here are some pictures: http://imgur.com/a/WYGra > > Thanks, > > Kyle >