> From: Jim Stephensn > I'm looking for a cable or cable pinout to get the console of this > 11/03 going. > ... > It has a M7940-YA DLV11 controller.
Hmm. I can't find anything online about the -YA variant of the DLV11; the DLV11 prints (MP00055) don't seem to show it. I don't know exactly wqhat the "extra wires to bring out clock & .. 110/300 speed change" entail - and whether you have to have the right jumpers, etc in the Berg connector to make it run? Maybe the easier path would be to buy a different DL-type serial line board (plain DLV11, DLV11-E, DLV11-F, DLV11-J), they're available on eBait for not much money, usually - unless you already have one on hand, of course. (Or did you - for authenticity reasons - _have_ to run the -YA card?) Those are all a known quantity, pinout-wise; the first three all use the standard DL11 cable [same as the UNIBUS one, M7800], the last one uses the smaller header common to the later QBUS machines (e.g. 11/23+, etc). If you have the Berg female shells and pins (not sure if you do; if not, definitely worth getting them, since the cables are basically unobtainable, but fairly easy to make), but don't know the pinout for them, let me know, and I can supply both null-modem and non-null-modem cable diagrams (for DB25 connectors, already worked out; I have made DB9 serial cables, but not for direct connection to a DLV11, but could generate those too). Noel