Robert Jarratt wrote:
>
>
> > -----Original Message-----
> > From: cctalk [mailto:cctalk-boun...@classiccmp.org] On Behalf Of Holm
> Tiffe
> > Sent: 25 December 2015 13:15
> > To: General Discussion: On-Topic and Off-Topic Posts
> > Subject: Re: VAX 4000-500 PSU Overload?
> >
> > This Capacitor was bad in my PSU too and I've changed it.
>
> In the light of what you say below, do you mean you only changed this one,
> or did you change all of the ones on the logic board? Does that include the
> really big ones too?
No, I've changed all smaller electrolytics, the big brown 6800µF and the
big filter caps after the rectifiers remained untouched.
The bigger caps aren't loaded that much in relation to ther volumina
with pulsed currents as the smaller ones and the se works better on big ones.
The ability to dissipiate heat is also better for big capacitors and that's
the cause that they are still wet internally and therefore still working.
Regards,
Holm
--
Technik Service u. Handel Tiffe, www.tsht.de, Holm Tiffe,
Freiberger Straße 42, 09600 Oberschöna, USt-Id: DE253710583
www.tsht.de, i...@tsht.de, Fax +49 3731 74200, Mobil: 0172 8790 741
