Nicely done! I don't think I've seen that one before; can you supply a
quick toggle in?
Mike
I can't take any credit. Here is what DG sent me. Look to him for any
elaboration. :)
---------------------------
*0 Page 1
set switches to 0 (down)
hit load address
1 0000 *0
set switches to 5100
hit deposit
2 00000 5100 JMP START
set switches to 100
hit load address
3 0100 *100
set switches to 7326
hit deposit
4 00100 7326 START, CLA CLL CML RTL
set switches to 7001
hit deposit
repeat for rest of instructions
4 00100 7326 START, CLA CLL CML RTL
5 00101 7001 IAC
6 00102 7004 LEFT, RAL
7 00103 4113 JMS DELAY
8 00104 7420 SNL
9 00105 5102 JMP LEFT
10 00106 7010 RIGHT, RAR
11 00107 7430 SZL
12 00110 5102 JMP LEFT
13 00111 4113 JMS DELAY
14 00112 5106 JMP RIGHT
15
16 00113 0000 DELAY, 0
17 00114 3127 DCA TEMP
18 00115 1177 TAD (-10
19 00116 3125 DCA DELAY1
20 00117 1127 TAD TEMP
21 00120 2126 LOOP, ISZ DELAY2
22 00121 5120 JMP LOOP
23 00122 2125 ISZ DELAY1
24 00123 5120 JMP LOOP
25 00124 5513 JMP I DELAY
you can stop here
Set switches to 0
hit load address
hit start
If you set the auto restart switch (leftmost on the right backplane) it
will start running when you power on the machine. Manually halt with single
instruction switch before powering off to prevent memory corruption. Turn
switch back off for auto start to work.
to check you entered correctly or find it where it gets corrupted
enter address
hit load address
hit examine to step through each location
must reload address of bad location (MA register) to write to location shown
26 00125 0000 DELAY1, 0
27 00126 0000 DELAY2, 0
28 00127 0000 TEMP, 0
00177 7770
29 $
No detected errors
No links generated
