How the heck do you copy an RX02 disk for use in simh? I've been trying to transfer RX02 images between simh and a real PDP11 (that has only two RX02's, console, and ethernet). So far, I've only attempted sending an RX02 image from the PDP to simh, but simh fails to read it: "?DIR-F-Invalid directory". Even after adding 13*512 bytes to the start for the missing track, I still get invalid directory.
My process is to COPY/DEVICE/FILES DY1:/START:0/END:330 DY0:BLOCK1.DAT, then FTP that off the PDP, delete the file, and do the remaining two thirds of the disk. Once all are transferred, "cat *DAT > floppy.dsk". I can transfer RX50 images using the same recipe, though I haven't tried sending an RX50 image created on simh back to the PDP. For what it's worth, I'm having the same problem with Alan Baldwin's TCP/IP disk images from http://shop-pdp.net/rthtml/tcpip.htm. simh can't read the individual DSK images, but could read the *.PKG with the disks inside, and from that, I could (RT-11) MOUNT each disk to a logical device. b On Thu, Jan 28, 2016 at 11:50 AM, Mattis Lind <mattisl...@gmail.com> wrote: > I found some 8 inch floppies with distribution kits for MU-BASIC V2 and > RT-11 V03B. I imaged those and put them here > http://www.datormuseum.se/documentation-software/rx01-and-rx02-floppy-disks > if anyone is interested in playing with MU-BASIC. There are both RAW disk > images and to be used in SimH and like and also DMK/IMD files. > > The system that floppies came with is this little ( > http://www.datormuseum.se/computers/digital-equipment-corporation/pdp1103-l > ) > system once used at Scania in Södertälje. >