On Thu, Mar 17, 2016 at 4:02 PM, Mattis Lind <mattisl...@gmail.com> wrote:
> > > > > > > > I took a look at my 11/40, it has a 9312 in pos 1/2 in the middle of the > > 2nd/rear of two backplanes here: > > http://vintagecomputer.net/digital/PDP11-40/NPG.JPG > > > > With this arrangement I can boot into the console monitor installed on > the > > 9312. > > http://vintagecomputer.net/digital/PDP11-40/Console_test.JPG > > > This means that you not have the terminator in the last slot of the bus, > right? Since your bus is so short it won't probably matter. > > Dave McGuire and I went over the system and concluded the same, basically it's either put it there or I can't have an RL02 drive controller because the NC Grant. Dave pulled the NC Grant wire from the backplane (where the NC Grant card is now). Anyway, I think the RAM card I have installed in this machine is conflicting somehow with the RL02 attempt to initialize, this is TBD, but I can't quite boot the machine. -- @ BillDeg: Web: vintagecomputer.net Twitter: @billdeg <https://twitter.com/billdeg> Youtube: @billdeg <https://www.youtube.com/user/billdeg> Unauthorized Bio <http://www.vintagecomputer.net/readme.cfm>
