----- Original Message ----- From: "Paul Koning" <paulkon...@comcast.net> To: "General Discussion: On-Topic Posts" <cct...@classiccmp.org> Sent: Tuesday, April 19, 2016 4:24 PM Subject: Re: Keys - Non-Ace was RE: ACE Key codes (xx2247 etc.)
> On Apr 19, 2016, at 4:15 PM, Mike Stein <mhs.st...@gmail.com> wrote: > > I finally found my micrometer; is there a cross-reference of pin # vs. depth > or just a list of standard depths for ACE keys somewhere? Look here, http://www.hpcworld.com/mobile/km/pocketcutup/index.html, click "See the manual", it's at the bottom of the first page. ---------------- Well, that doesn't quite match Fred's numbers below, but close enough: http://www.locksafesystems.com/depth_and_space.htm#Chicago_Tubular_Space_and_Depth > The depths by number are: > 1 - 0.0155" > 2 - 0.0310" > 3 - 0.0465" > 4 - 0.0620" > 5 - 0.0775" > 6 - 0.093" > 7 - 0.1085" > 8 - 0.1240" So, assuming I did it right the code for the XX4306 key used in some Cromemco models is 5514457; anybody else want to confirm that? m