> -----Original Message----- > From: cctalk [mailto:cctalk-boun...@classiccmp.org] On Behalf Of Adrian > Graham > Sent: 22 May 2016 12:16 > To: General Discussion: On-Topic and Off-Topic Posts > <cctalk@classiccmp.org> > Subject: Re: VGA Error Code from DECpc AXP 150 (Jensen) > > On 22/05/2016 11:51, "Robert Jarratt" <robert.jarr...@ntlworld.com> wrote: > > >> I can't remember what VGA card was in a Jensen, Compaq Qvision? > > > > > > Yes, that is correct. > > EISA card, yay. > > > Already tried it from the AlphaBIOS and I get the same error. The VGA > > output varies from all grey, to black and white vertical stripes, to a > > screen full of "@" symbols. > > Aaaand unless you've got the ECU diskette and a working floppy drive you > can't just move the card to a different EISA slot. Have you checked all the > caps on the motherboard? If slot power is reduced you might get those > symptoms. >
I do have the ECU diskette and I can run the ECU. I had contemplated moving the card to another slot but didn't think it would make a difference. Will give that a go. Thanks for the suggestion. Regards Rob