Tuesday night, I got a small 2 node thicknet segment going between my DEC VXT2000 and my laptop. I took a quick demo video, https://youtu.be/A5T2GlAN2N4
The hardware setup is as follows: I have a twisted pair (10BASET) to AUI converter (a Lantronix LTX-C) (not to be confused with a 10BASET MAU) which is connected to (and driving) a Cabletron coax MAU with 10BASE5 vampire tap. This is connected to a small piece of 10BASE5 coax, which is terminated with a 47 ohm resistor pushed into each end. This coax runs over to an identical MAU with vampire tap, and an AUI cable connects it to my DEC VXT2000. Anyway, I hope to demo a larger 10BASE5 network at VCF MW, but I need outside help since I only have two AUI capable devices (the LTX-C and my VXT2000). So if you're going to be at VCF MW, and you've got some gear with AUI on it, bring it along and I can hook you up. I have about 50m of cable I think, and plenty of MAUs, but I'm short on AUI cables with both ends on it, so bring along any you have if you'd like to connect. Regards, Joe Zatarski