Hi Mark, On Sun, Aug 28, 2016 at 6:19 PM, Mark G Thomas <m...@misty.com> wrote:
> > The difficulty I am having is I would like to configure the system with > both MSCP controller cards installed, so I can boot from either SCSI or > floppy, preferably with the SCSI still starting at DU0 so my BSD2.11 CFs > remain portable to my other system. > I have the same board configuration but with the quad wide KDJ11 processor and it works fine. So it may be something about the processor and ROM instead of the RQDX3. > > Another oddness I noted was that with my original RQDX3 config, if I > plug the M7516 ethernet card in, that breaks booting from floppy. > This shouldn't happen if the CSR addresses don't conflict. Could it be something with the backplane? -chuck
