For those who may be interested, I've placed a copy of the Vector Graphic manual entitled "PROM/RAM Board Users Manual and Assembly Instructions" here: http://vintagecomputer.ca/download/vector_graphic/Vector-Graphic-PROM-RAM-Rev-3-card-Manual.pdf
Hope this helps, Santo On Thu, Jan 19, 2017 at 8:36 PM, Santo Nucifora <santo.nucif...@gmail.com> wrote: > Hi Win, > > I think I have you covered. I have an unopened Vector Graphics RAM/ROM > Revision 3 board with full assembly guide/user manual/schematics. Includes > source for a memory test program, the Vector 1 Monitor 1.2 source listing > and an errata sheet with an extra jumper. > > Here's a pic of my board/parts: http://vintagecomputer.ca/wp- > content/uploads/2017/01/Vector-Graphics-RAM-ROM-board-Rev-3.jpg > > Oddly enough, my Vector Graphics 1++ has the 12k RAM/ROM board so I don't > have a Rev 3 running. I'll scan the manual tomorrow and email you a PDF. > > Hope this helps. > Santo > > On Thu, Jan 19, 2017 at 7:27 PM, Win Heagy <whe...@gmail.com> wrote: > >> This was helpful, thanks. Unfortunately, I did not find anything >> specifically related to the specific PROM/RAM board that I have. >> There was a pretty good manual related to the VG PROM III. I'm sure >> there is some overlap with my board. The documentation I have for my >> board is very sparse. I'm not sure if this is all that is available, >> but it discusses jumpers on the board but doesn't give details on how >> they are configured, or a description of setup and operation of the >> board. >> >> I tried what I could decipher from my docs, but I haven't seen any >> signs of life. It's also possible that the board is not working, but >> I'd like to be sure I'm actually using it correctly. >> >> Any other pointers appreciated. >> >> Thanks...Win >> >> > Does anyone have experience with the Vector Graphics PROM/RAM >> > card...like this one. >> > http://www.classiccmp.org/dunfield/s100c/vector/promram.jpg >> > (This is not my card...mine is not jumpered in upper right.) >> > I have some documentation with mine and two PROMs loaded in A0 and A1 >> > (VIMON loaded on them), but am having some trouble getting any >> > response from it. Most likely a config issue or a conflict with other >> > RAM. >> >> Win, >> >> There are two resources that might be useful to you: >> >> 1. The VECTOR-GRAPHIC mailing list, inhabited by a couple of former >> Vector employees, among others - >> http://h-net.msu.edu/cgi-bin/wa?A0=vector-graphic >> >> 2. The Vector Graphic file archive - >> http://vector-archive.org/index.php >> >> De >> > >