Hey Alex, I haven't re-traced a PCB but I would probably do the same thing Jim is suggesting - import a graphic into my CAD program and trace it over with metal. EAGLE has lots of scripts available to import graphics, DXFs and do other completely different things. You can also write your own!
I'll be able to try converting his scans to 2-color, then he can import them using his scripts. I won't have tim to do the tracing with metal though. =] -- Anders Nelson +1 (517) 775-6129 www.erogear.com On Wed, May 10, 2017 at 9:29 AM, Alexandre Souza < alexandre.tabaj...@gmail.com> wrote: > Anders, mind sharing which method you use to redraw a PCB? I have lots of > interest in this subject. > > > 2017-05-10 13:20 GMT-03:00 Anders Nelson via cctalk <cctalk@classiccmp.org > >: > >> Hey Jim, >> >> I can probably do this for you but I'm pretty busy for the moment. What's >> your desired timeline? I've been using EAGLE since 2005 so I'm familiar. >> >> =] >> >> -- >> Anders Nelson >> >> +1 (517) 775-6129 >> >> www.erogear.com >> >> On Wed, May 10, 2017 at 8:23 AM, Doug Ingraham via cctalk < >> cctalk@classiccmp.org> wrote: >> >> > If this is a one off all you need to do is print the negatives on >> > transparency material with a laser printer. >> > The laser printers tend to have a little more opacity than ink jets do >> but >> > I have done this with an ink jet >> > printer as well. I also once plotted directly on the bare copper with a >> > sharpie and had it turn out ok. >> > >> > Align the negatives on the sensitized board stock. >> > Expose. >> > Develop. >> > Etch. >> > Drill >> > Solder in your feed throughs. >> > Put the parts on the board. >> > Debug >> > >> > If on the other hand you want to make even 5 boards you would be better >> off >> > with your approach. >> > >> > Best wishes! >> > >> > -- >> > Doug Ingraham >> > PDP-8 SN 1175 >> > >> > >
