Thank you all for the information I found a power cord on ebay! I really appreciate it!
Greg On Thu, Dec 14, 2017 at 11:26 PM, Brent Hilpert via cctalk < cctalk@classiccmp.org> wrote: > > On 2017-Dec-14, at 10:20 PM, Chuck Guzis via cctalk wrote: > > > On 12/14/2017 08:58 PM, Gregory McGill via cctalk wrote: > >> I recently picked this up from shopgoodwill and it has an older power > >> plug. It is NOT a standard plug as shown in the picture below that is > too > >> tall and pins are smaller etc.. > >> > >> Anyone know the name of this 'standard' so I can find a cable? Or > possibly > >> have one around I can get from you? > >> > >> Greg > >> > >> https://sgws3productimages.azureedge.net/sgwproductimages/images/8/11- > 25-2017/310248925111157io.JPG > >> https://photos.app.goo.gl/HzXVUDqfCv5U7zBC2 > >> > > > > From the looks of your unit, it might just be simpler to fit it with a > > standard IEC receptacle. Note that the cutout is already rectangular, > > so an IEC may just fit without any case modification. > > > The screw holes have a slightly different spacing between the two types, > they have to be 'moved' (filed) out about a mm each; > and it looks like the existing opening will have to be enlarged vertically > a bit. > If there's nothing interfering on the inside it does look like an easy > candidate for replacement with IEC.
