On Thu, Jan 18, 2018 at 7:55 PM, Richard Cini <rich.c...@verizon.net> wrote: > I use this card as a floppy/disk controller in a PC/AT that's used solely for > imaging. The controller is connected to two Seagate ST-2502N (442MB) hard > drives running MS-DOS 6.22. Works like a champ. Cables are readily available > on eBay but since they're regular 50-pin IDC connectors, you can DIY if > needed -- connectors are readily available.
Do you have (and can you post) the MS-DOS drivers for that card? I also run one in my floppy imager machine, which dual-boots btw. MS-DOS and some later Linux. Having SCSI for at least one of the OSes would be nice. I could also switch the other partition over to FreeBSD, as Warner L suggested.