On Sat, Jun 23, 2018 at 11:06 PM, Glen Slick via cctalk < cctalk@classiccmp.org> wrote:
> On Sat, Jun 23, 2018 at 9:38 AM, Carlo Pisani via cctalk > <cctalk@classiccmp.org> wrote: > > (x11 terminal) C3253A HP Envizex P-Series > > > > Up for sale is a X-Terminal made by Hewlett Packard in 1995. > > > > Tested, in perfect working conditions!!! > > > > cpu: i960 @ 33Mhz (it's the fastest available on Envizex v1) > > ram: 48MB (builtin + 16+16+8, the first two sims need to be equal) > > rom: none (sorry, It doesn't have any font-rom, it loads fonts from > tftp/NFS) > > vram: 2MB > > lan: 10Mbps BASET RJ45 (it also comes with an AUI port on the back) > > kb/mouse: common PS/2 (F12 is a special key, but Envizex works on > > common keyboards, HIL keyboards are also supported) > > Media: floppy 3.5",1.44MB > > Software included! > > > > It comes with all the documentation, configuration-scripts, and > > startup for Linux (sorry, I don't have HPUXv10.20/v11, I can't > > test/adapt scrips). > > > > I also have a C3253A HP Envizex P-Series. I was fortunate to also > acquire a PCMCIA flash card adapter for it and was able to get it set > up to boot from a PCMCIA linear flash card. I don't have the optional > floppy drive in mine. > > I have a set of 3 Netstation software CDs that I got from someone else > on the list a few years ago. I forget if I ever uploaded images of > these CDs somewhere. For the C3253A HP Envizex P-Series you need > Version 7.1 > could you upload them to archive.org? Netstation software is somewhat hard to find these days. Netstation Software > For HP ENVIZEX, ENTRIA and 700/RX > Version 7.1 > Supported Hosts: HP/SUN/IBM > Part No. B3651-10117 > > Netstation Software > For HP ENVIZEX II and ENTRIA II > Version 9.1 > Supported Hosts: HP/SUN/IBM > Part No. B3651-10121 > > Netstation Software > For HP Netstations > Version 7.1/9.1 > Supported Hosts: HP-UX 11.0 > Part No. B3651-10122 >
