Most likely not DEC. The blank handle says as much, and the part numbers you
gave are not in the DEC standard format. Also, I would not expect "R-K" in a
DEC references to the RK05/RK11.
paul
> On Aug 29, 2018, at 2:28 PM, Bill Degnan via cctech <cct...@classiccmp.org>
> wrote:
>
> I have what I believe to be two DEC RK05 bootstrap boards each with a ROM
> labeled 802350 A. UNIBUS. The plastic handle tabs are Digital Equipm.'s
> but it could be an OEM as there is nothing printed on them.
>
> On the board is printed on what would be the bottom front side
> R-K ABBR BOOT P.C. BOARD 609395 REV B
> on one line and under that
> 802000 REV
>
> There is a round sticker on the back of the board written in pen that reads:
> LL
> 802000
> Rev B
> 6-17-76
>
> printed on the backside of the board near the sticker is 609395 REV B
>
> I use a M9312 to bootstrap from the monitor but I am curious how I'd
> attempt to use one of these. Any thoughts?
>
> Bill
